Lexmark 6500 Series manual PictBridge communications error, 196

PictBridge communications error

Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer.

Please remove the camera card.

The printer can read either a PictBridge-enabled digital camera or a memory card, but not both at the same time.

1Remove both the PictBridge-enabled digital camera and the memory card.

2Reinsert only one of the devices mentioned above.

Some photos removed from card by host.

Some of the photos on the photo proof sheet were deleted from the memory card through the computer. You must print a new photo proof sheet.

For more information, see “Printing photos stored on the memory device using the proof sheet” on page 93.

Problems reading the memory card

•See “Memory card cannot be inserted” on page 176.

•See “Nothing happens when memory card is inserted” on page 177.

2-Sided Paper Type Error

The paper type loaded in the printer is not plain paper.

To print or copy on both sides of the paper, use only plain paper.

1Press to clear the error message.

2Load plain paper.

3Press Settings.

4Press or until Paper Setup appears on the display.

5Press .

6Press or until Paper Type appears.

7Press .

8Press or until Auto Detect or Plain appears.

9Press .

10If is not lit, press .

11Press Start Color or Start Black.

File Not Supported

The computer failed to find an application to support the file that you want to print.

Make sure that the memory card or flash drive inserted into the printer contains files that have file name extensions DOC, XLS, PPT, PDF, RTF, DOCX, XLSX, PPTX, WPS, or WPD.

For more information, see “Printing document files from a memory card or flash drive” on page 69.

196