Lexmark 6500 Series manual Schedule to resend fax at a later time, Use phone line checklist, 190

6Press .

7To change the number of times the printer will redial:

aPress or repeatedly until Redial Attempts appears.

bPress .

cPress or repeatedly until the setting you want appears.

dPress .

8To change the length of time between redials:

aPress or repeatedly until Redial Time appears.

bPress .

cPress or repeatedly until the setting you want appears.

dPress .

Schedule to resend fax at a later time

See “Sending a broadcast fax at a scheduled time” on page 115.

Failed to Connect

These are possible causes and solutions. Try one or more of the following:

Use phone line checklist

•Resend the fax. There may have been a problem with the quality of the telephone line connection.

•Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly.

•If the telephone line is being used by another device, wait until the other device is finished before sending the fax.

Make sure the printer detects dial tone

•See “Sending a fax while listening to a call (On Hook Dial)” on page 115.

•Check the Dial Method setting.

1Listen for a dial tone. If you hear a dial tone, but the printer hangs up without dialing, this means it did not recognize the dial tone.

2From the control panel, press Fax Mode.

3Press .

4Press or repeatedly until Fax Setup appears.

5Press .

6Press or repeatedly until Dialing and Sending appears.

7Press .

8Press or repeatedly until Dial Method appears.

9Press .

10Press or repeatedly until the method you want appears.

11Press to save this setting.

190