Lexmark 6500 Series Scanning to a computer over a network, Saving a scanned image on the computer

8Press .

Note: Pressing selects a setting. An asterisk (*) appears next to the selected setting.

9To go into additional submenus and settings, repeat pressing or repeatedly until the submenu item or the setting you want appears, and then press .

10If needed, pressrepeatedly to return to the previous menus and make other setting selections.

11Press Start Color or Start Black.

Use this

Quality 1

Original Size 1

To

Adjust the quality of a scan.

Specify the size of the original document.

1Temporary setting. For information on saving temporary and other settings, see “Saving settings” on page 39.

Scanning to a computer over a network

Make sure:

•The printer is connected to the network through a print server, and the printer and computer receiving the scan are on.

•The printer is configured to scan over a network (Direct IP Printing).

1Load an original document facedown on the scanner glass.

2From the control panel, press Scan Mode.

3Press or repeatedly until the computer to which you want to scan is highlighted.

4Press .

5Press or repeatedly until the scan destination you want appears.

6Press Start Color or Start Black.

Saving a scanned image on the computer

1Load an original document facedown on the scanner glass.

109