Note – The prompt is displayed in the early stages of Windows Setup and lasts for approximately five seconds and is easy to miss. If you do not press F6 while the prompt is being displayed, the screen allowing you to specify additional drivers is not displayed and the installation will fail. You will need to restart the system and go back to Step 3.
After pressing F6, a screen will appear providing you with the option to specify additional mass storage devices.
FIGURE 6-4 Specify Additional Device Screen
7.Make sure that the mass storage drivers are accessible according to the mass storage driver installation method that you have selected.
■Floppy Disk Local: Mass storage drivers floppy disk in floppy drive A attached to the server
■Floppy Disk Remote: Mass storage drivers floppy disk in the JavaRConsole server floppy drive
■Floppy Image (only supported for server modules using ILOM): the smi.img vailable on the JavaRConsole system
Chapter 6 Installing Windows Server 2003 | 33 |
