Operating the Equipment Locally
Page 4-66 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Table 4.65: Output Source Options
Selected Option Description
SDI Embedded (1-4) Any of the SDI embedded audio feeds.
XLR Input (Monitor) Output the audio whi ch is input to the card.
Off No output.

Output Format Option

To access the Output Format option, press the Output Format softkey in
the Audio XLR Menu.
Table 4.66: Output Format Options
Selected Option Description
Analogue Analogue output balanced @ 10 W impedance.
Digital AES/EBU (balanced).

Output FSR Option

To access the Output FSR (Full Scale Range) option, press the Output
FSR softkey in the Audio XLR Menu.
Table 4.67: Output FSR Options (When Analogue Input Selected)
Selected Option Description
15 dB Analogue maximum output 15 dB.
18 dB Analogue maximum output 18 dB.

Firmware Release Option

This option indicates the firmware release of the Audio XLR Card. It is for
status only and cannot be changed.

Hardware Release Option

This option indicates the Hardware release of the Audio XLR Card. It is for
status only and cannot be changed.
4.10 Data Menu

4.10.1 Introduction

The Data Menu is selected from the Setup Menu by pressing the Data
softkey. This menu permits the selection of RS-232 asynchronous data and
RS-422 synchronous data channel parameters. If M2/EOM2/DAT is fitted
there are additional menus for RS-422 data and for RS-232 asynchronous
data.
See Figure 4.16 for the menu structure.