TANDBERG E5714, E5740 Contact Information

Preliminary Pages

Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page vii

ST.TM.E10076.3

Contact Information

TANDBERG Television Customer Services

Support Services

Our primary objective is to provide first class customer care that is tailored

to your specific bu siness and operat ional requirement s. All levels are

supported by one or more service performance reviews to ensure the

perfect partnership between TANDBERG Television and your business.

Warranty

All TANDBERG Products and Systems are designed and built to the highest

standards and are covered under a comprehensive 12 month warranty.

Levels of Continuing TANDBERG Television Service Support

For stand-alone equipment, then TANDBERG Television BASIC

Advantage is the value for money choice for you. BASIC provides you

with year-by-year Service long after the warranty has expired.

For systems support you can choose either Gold or Silver Advantage.

These packages are designed to save you costs and protect your income

through enlisting the help of TANDBERG Television support specialists.

VOYAGER Advantage is the truly mobile servic e solution. This p rovides a

package specifically designed to keep you mobile and operational.

Call TANDBERG Sales for more details.

Where to Find Us

Europe, Middle East +44 (0) 23 8048 4455

and Africa: Fax: +44 (0) 23 8048 4467

fieldservice@tandbergtv.com

Americas: +1 (321) 308 0470

fieldservice-americas@tandbergtv.com

China: +86 10 6539 1109 (Beijing)

+852 2530 3215 (Hong Kong)

fieldservice-asia@tandbergtv.com

Australia/NZ: +612 9360 2053

fieldservice-australia@tandbergtv.com

Internet Address: http://www.tandbergtv.com

Contents

Main INSTRUCTION MANUAL Page List of Contents About this Manual ST.AN.1094: Video Noise Reduction and Compression Nomenclature Acknowledgements General Registered Trademarks Trademarks Warnings, Cautions and Notes Heed Warnings Read Instructions Follow Instructions Retain Instructions Contact Information TANDBERG Television Customer Services Support Services Warranty Levels of Continuing TANDBERG Television Service Support Technical Training Training Courses Where to Find Us Customer Services and Technical Training Postal Address Return of Equipment Chapter 1 1. Introduction to the Basic Encoder Page 1.1 Scope of this Manual 1.1.1 Who Should Use This Manual 1.1.2 Build Version 1.1.3 What Equipment is Covered by This Manual Equipment Models Page Information Label Hardware Configuration Build Revision 1.2 Role of the Encoder in a System 1.2.1 Typical System 1.2.2 DSNG Systems E5714 E5740/E5760 1.2.3 DENG Systems 1.3 Summary of Features Motion Estimation Variable Video Bit-rate Coding Resolutions Internal Frame Synchroniser 1.3.2 Audio Encoding Dolby Digital (AC-3) pre-encoded audio (IEC 61937 specification) in Page Test Tones Audio Variable Bit-rate Dolby Digital (AC-3) Table 1.6: Dolby Digital Audio Encoding Bit-rates 1.3.3 Vertical Blanking Interval (VBI) Line Processing Modes The Encoder has three modes for processing VBI lines. VBI in Picture Page 1.3.5 Outputs 1.3.6 IF Modulation E5714 E5740 E5715/E5750 1.4 Guided Tour 1.4.1 Enclosure 1.4.2 The User Interface 1.4.3 Front Panel Description Front Panel Display, Navigation Keys, Softkeys, Keyboard 1.4.4 Rear Panel Description 1U Chassis Figure 1.10: E5714 (1U) Rear Panel Component Parts and Connectors Figure 1.11: E5715 (1U) Rear Panel Component Parts and Connectors 2U Chassis Figure 1.12: E5740 (2U) Rear Panel Component Parts and Connectors 1.4.5 Boards in the Basic Encoder Model Number Card Page Chapter 2 2. Installing the Equipment Page 2.1 Introduction 2.1.1 Read This First! 2.1.2 General 2.1.3 Site Requirements Power Supplies 2.2 Preliminary Checks 2.2.1 Mechanical Inspection 2.2.2 Moving the Equipment Safely 2.3 Installing the Equipment 2.3.1 Fixing Method 2.3.2 Cable Routing 2.3.3 Equipment Access 2.3.4 Ventilation Page 2.4 AC Mains Operating Voltage and Earthing 2.4.1 AC Power Supply 2.4.2 Power Cable and Earthing Protective Earth/Technical Earth Connecting the Encoder to the AC Power Supply 2.5 DC Operating Voltage and Earthing 2.5.1 DC Power Supply 2.5.2 DC Power Cable and Earthing DC Power Connector (Encoder) 2.6 Signal Connections For the Basic Unit 2.6.1 Introduction Figure 2.4: E5715 (1U) Rear Panel Component Parts and Connectors Figure 2.5: E5740-IF (2U) Rear Panel Component Parts and Connectors Figure 2.6: E5740-L-Band (2U) Rear Panel Component Parts and Connectors Figure 2.7: E5750 (2U) Rear Panel Component Parts and Connectors 2.6.2 Connecting Up the Basic Encoder Figure 2.8: Equipment Connections for the Basic Unit Encoder 2.6.3 Power Supply 2.6.4 Technical Earth 2.6.5 Video Inputs SDI IN H SYNC 2.6.6 Audio Inputs 2.6.7 ASI OUT 1, 2 and 3 Outputs 2.6.8 Control Interfaces Connection Ethernet #1 and #2 Alarm Remote Control 2.6.9 Data RS-232 Connector RS-422 Connector 2.6.10 Satellite Modulator IF Output (E5714 and E5740 IF) IF Out (Main) IF Out (Monitor) 2.6.11 Satellite Modulator L-Band Output (E5740 LBAND) L-Band In 2.6.12 OFDM Modulator Outputs (E5715 and E5750) IF Out 1 IF Out 2 2.7 Powering Up/Down 2.7.1 Before Powering Up 2.7.2 Powering Up 2.7.3 Powering Down 2.8 Setting the Encoder IP Address 2.8.1 Methods of Changing the Encoder IP Address 2.8.2 From the Front Panel Menus 2.8.3 Via Telnet Chapter 3 3. Options and Upgrades Page 3.1 Whats Available 3.1.1 Option Functions 3.1.2 Limitations on Number of Option Modules (2U Only) E5740 Option Slots E5750 Option Slots 3.1.3 Limitations on Use of Option Modules 3.1.4 How to See Which Options are Fitted/Enabled 3.2 Bit-rate Limits With Reflex Licence and/or Performance Upgrade 3.3 Basic Interoperable Scrambling System - BISS (M2/EDCOM2/BISS) 3.4 Additional Audio and Linear PCM Option (M2/EOM2/AUDLIN) 3.4.1 Overview 3.4.2 Assembly Audio In Connector Table 3.4: Audio In Connector 3.5 RS-232 and RS-422 Data Input Option (M2/EOM2/DAT) 3.5.1 Overview 3.5.2 Assembly Async Connector Sync Connector Table 3.6: RS-422 Data Connector (Option Module) - Synchronous 3.6 Remux Option (M2/EOM2/REMUX) 3.6.1 Overview The M2/EOM2/REMUX Remux Option Module is supported by Build version 2.2.0 and later. 3.6.2 Assembly Figure 3.3: Remux Option (M2/EOM2/REMUX) 3.6.3 Stages of Remultiplexing Figure 3.5: Block Diagram Two Stages of Remultiplexing 3.6.4 Function of Remultiplexer 3.6.5 Using the Remultiplexer 3.6.6 ATSC Remultiplexing 3.6.7 Setting Bit-rates and Avoiding Overflow 3.6.8 What to do if Overflow Occurs 3.7 XLR Expander Card Option (M2/EOM2/XLR) Audio In Connector XLR IN L, AES/EBU Pin Analogue Digital Table 3.10: Audio In R Connector XLR IN R Pin Analogue Digital Audio Out Connector Table 3.12: Audio Out R Connector 3.8 SD Decoder Option (M2/EOM2/DEC) 3.8.1 Overview 3.8.2 Assembly ASI Out SDI Video Out Composite Video Output Audio Output RS-232/RS-422 Data Output 3.9 QPSK Demodulator (M2/EOM2/QPSKDEMOD) 3.9.1 Overview 3.9.2 Assembly IF In RF In 3.10 16QAM Demodulator (M2/EOM2/SATDEMOD) 3.10.1 Overview 3.10.2 Assembly L-Band Inputs 3.11 IP Output Card (M2/EOM2/IP) 3.11.1 Overview 3.11.2 Assembly ASI In RS-232 Control ASI Out Ethernet Output 3.12 Software Options 3.12.1 M2/ESO2/NR 3.12.2 M2/ESO2/PU Page Chapter 4 4. Operating the Equipment Locally Page Page Page Page Page Page Page 4.1 Introduction 4.2 Establishing Local Control (1U) 4.3 Navigating the Display Screens (1U) 4.3.1 Introduction Default Service (On Air) 204 B Page Page 4.4 Establishing Local Control (2U) 4.4.1 Input Monitor 4.4.2 Summary Screen 4.4.3 A(udio)/V(ideo) Menu (2U) 4.4.4 Keyboard Lock (2U) 4.5 Navigating the Display Screens (2U) 4.5.1 Moving Through the Menu Screens 4.5.2 How to Use the Keypad 4.5.3 How to Use the Functions Associated with Softkeys The following display screens show the different functions associated with the options. 4.5.4 Display Screens 4.5.5 Menu Formats All menus generally conform to the following format. Some of the menus provide access to sub-menus. Figure 4.8: Menu Hierarchy Summary Screen and Advanced Menus Page 4-16 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder 4.5.6 Summary Screen and Advanced Menus 4.6 Setup Menu 4.7 System Menu 4.7.1 Introduction Figure 4.9: Menu Hierarchy Setup/System Menu Page 4-18 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder 4.7.2 Service Info Menu (Syntax = ATSC1) Short Channel Name Option Long Channel Name Option Syntax Option SI Level Option Major Channel Option (3.0 and later) Minor Channel Option (3.0 and later) Program Number Option Service Type Option (3.0 and later) 4.7.3 Service Info Menu (Syntax = DVB) Network Id Option Service Id Option Transport Stream Id Option Service Type Option (3.0 and later) Dolby AC-3 Descriptor Option (3.0 and later) Logical Chan Desc Option Logical Channel Option 4.7.4 Remote Control Menu IP Address Option MAC Address Option Network Mask Option Gateway Address Option SNMP Master Option Last SNMP Master Option Last SNMP Poll Option SNMP Trap IP Option SABus Address Option 4.7.5 General Menu Model Number Option Config Name Option Local Time Option Local Date Option UTC Offset Option Temperature Option Screen Saver Option Keypress Beep Option Power Dip Recovery Option Upgrade Encoder Option Software Release Option Fan Control Option 4.7.6 Advanced Menu Setup Password Option Current Password Option Display Errors Option System Control Option Action On PID Error Option SNMP Control Option Display Contrast Option No. Services Option (3.1 and later) Reset On Download Option 4.8 Video Menu 4.8.1 Introduction 4.8.2 Video Source Menu Video Input Option Figure 4.10: Menu Hierarchy Setup/Video Menu Input Source Select This option is available in Build version 3.1.0 and later. Selected Option Description Figure 4.11: Setting up the Video Input Frame Rate Option Video Locked Option Ident Text Option Text Colour Option Background Colour Option Video Bandwidth Option OP Video Loss Option Input Termination Option Noise Reduction Option Default 625 Config and Default 525 Config Logo Option (When Logo Downloaded into Unit) 4.8.3 Video Encoder Menu Profile/Level Option Table 4.31: Profile/Level Options Compression Mode Option Table 4.32: Compression Mode Options Bit-rate Option VBR Mode Option Page Page Aspect Ratio Option AFD Option Table 4.37: AFD Information Video Input Encoder For some GOP changes operation can be seamless but this is not guaranteed. GOP Structure Option Selected Option Description GOP Length Option Long GOPs Option (3.1 and later) Field/Frame Option 3:2 Pulldown Option Concatenation Option Page 4.8.4 Vertical Blanking Interval (VBI) Menu VBI In Picture Option VPS (Line 16) Option WSS (Line 23) Option Closed Caption Option CC Format Option Auto Detect VITC Option VBI Line n Option Table 4.43: VBI - Line n Options Option Description FIELD 1 FIELD 2 Figure 4.12: VBI Structure Implemented by TANDBERG for 525-line Systems Figure 4.13: VBI Structure Implemented by TANDBERG for 625-line Systems 4.9 Audio Menu 4.9.1 Overview 4.9.2 Audio A and B Menus Figure 4.15: Menu Hierarchy Setup/Audio Menu Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-53 Source Option Coding Standard Option Audio Bit-rate Option Input Level L Option Input Level R Option Coding Mode Option Auto Lip Sync Option Lip Sync Offset Option Audio Delay Option External Delay Option Clip Level Option Impedance Option Language or Language Left/Right Option SMPTE 302M Standard Option Channel Option Bit Stream Mode Option Dialogue Level Option Dolby Srnd Mode Option Production Info Option Mixing Level Option Room Type Option Copyright Option Original Option Dynamic Range Option RF Protection Option Deemphasis Option DC Filter Option Low Pass Filter Option Embedded 1-2 DID Option Embedded 3-4 DID Option Audio PID Option Hardware Release Option 4.9.3 Audio Languages Menu 4.9.4 Audio XLR Menus (3.0 and later) Input Format Option Input Termination Option Input Clip Level Option 4.10 Data Menu 4.10.1 Introduction Figure 4.16: Menu Hierarchy Setup/Data Menu 4.10.2 Data A - RS232 Menu (3.0 and later) Encoding Option Baud Rate Option RS232 PID Option Delay Option 4.10.3 Data B - RS422 Menu Encoding Option Bit-rate Option RS422 PID Option Test Mode Option Delay Option D Mode Option 4.11 Output Menu Figure 4.17: Menu Hierarchy Setup/Output Menu Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-71 4.11.2 Output Format Option 4.11.3 Delivery Descriptor Menu 4.11.4 Descriptor Type Option 4.11.5 Descriptor Type = Terrestrial Band Plan Option Channel Option Bandwidth Option Hierarchy Option FEC (HP) and FEC (LP) Options Guard Interval Option Carriers Options Other Frequency Option 4.11.6 Descriptor Type = Cable FEC (Outer) Option FEC (Inner) Option 4.11.7 Descriptor Type = Satellite FEC (Inner) Option Symbol Rate Orbital Position Option West East Option 4.11.8 Output Format = Satellite Modulator (IF Output) IF Output Option IF Power Option IF Frequency Option Modulation Option Mod Type Option Spectrum Invert Option Roll Off Factor Option Tx Bandwidth Factor Option Tx Bandwidth Option Bit-rate (188) Option Bit-rate (204) Option Preset Pwr Low Option Sat Deliv Freq Option Sat Orb Pos Option Sat West/East Option Page Page Page Bandwidth Option Modulation Mode Option Guard Interval Option Page 4.11.11 Output Format = IP Streamer (3.1 and later) Own IP Address Option Network Mask Option Router IP Address Option Destination IP Address Option 4.12 Mux Menu 4.12.1 Overview 4.12.2 Mux Output, no Remux Card Page Figure 4.18: Menu Hierarchy Setup/Mux Menu (DVB) Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-91 Figure 4.19: Menu Hierarchy Setup/Mux Menu (ATSC) Page 4-92 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder 4.12.6 Bit-rate (188) and Bit-rate (204) Option 4.12.7 Clock 4.12.8 PCR PID Option 4.12.9 FPGA Firmware 4.12.10 RAS Firmware 4.12.11 BISS12 Hardware 4.12.12 BISS Firmware 4.12.13 RAS Options Enabled 4.12.14 BISS Options Enabled Scramble Option BISS Key Entry Option Session Word Option Enc Session Word Option BISS-E Injected Id Option 4.13 Remux 4.13.1 Introduction 4.13.2 Addition to Mux Menu When Remux Fitted Host Bit-rate Option 4.13.3 Remux Module Menu Page Source (BNC) Option Short Name In Option Short Name Out Option Name (In) Option Name Out Option Service Prov (In) Option Service Provider Option Service Id (Out) Option Program Number (Out) Option Page PCR PID Option Video Option ECM (CA) PID Option VBI PID Option Audio (Type of Audio) Option Data (Type of Data) Option Teletext Option 4.14 IRD Menu (3.1 and later) 4.14.1 Overview 4.14.2 IRD Mode Option 4.14.3 IRD TS Source Option Figure 4.20: Menu Hierarchy Setup/IRD Menu 4.14.4 IRD Demod Menu Polarisation Option Sat Input Option Modulation Option LNB Option LNB Lo Freq Option LNB Hi Freq Option LNB Switch Freq Option LNB Supply Search Range Option 4.14.5 Service List Menu 4.14.6 IRD Video Menu Stop Mode Option Aspect Ratio Option Video Output Source Option 525 Line Composite Option 625 Line Composite Option Rate Buffer Mode Option Video Default Output Option EDH Enable Option Embedded Audio Mode Option Embed Data ID Option Video PID 4.14.7 IRD Audio 1 and Audio 2 Menus Audio Stream Audio Routing Option Default Language Option Downmix Mode Option 4.14.8 IRD CA Menu DSNG Key Option BISS Mode Option Session Word Option Enc Session Word Option 4.14.9 IRD VBI Menu VITS Enable Option CCVC Enable Option VITC Enable Option GCR Enable Option 4.14.10 IRD Data Menu 4.15 Errors Menu Restore Defaults 4.16 Diagnostics Menu 4.17 Configs Menu 4.17.1 Accessing the Menu 4.17.2 Overview 4.17.3 Active Configuration 4.17.4 User Configurations 4.17.5 Backup Configurations 4.17.6 Factory Default Configurations 4.17.7 Configuration, Write-Protection 4.17.8 Quick Configuration From the Summary Screen 4.17.9 Load Active Config Option 4.17.10 Store Active Config Option 4.17.11 Load Configs From Backup Option 4.17.12 Store Configs in Backup Option 4.17.13 Factory 525 Defaults Option 4.17.14 Factory 625 Defaults Option Page Chapter 5 5. Web Browser Interface Page 5.1 Introduction 5.2 How to Set Up Internet Explorer For the Web Browser Interface Page Page 5.3 Web Browser Interface Options Page Page Page Page 5.4 Cloning a File Page Chapter 6 6. Preventive Maintenance and Fault-finding Page 6.1 Introduction 6.2 Preventive Maintenance 6.2.1 Routine Inspection - Cooling Fans 6.2.2 Cleaning 6.2.3 Servicing 6.3 Maintenance and Support Services 6.3.1 Introduction 6.3.2 Warranty 6.3.3 Levels of Continuing TANDBERG Television Service Support 6.4 Errors and Diagnostics Menus When to Use Them 6.4.1 Error Messages 6.4.2 Diagnostics Menu LCD Display Test Keyboard Test Fail Relay Test Alarm Relay Test Alarm LED Test 6.5 Fault-finding 6.5.1 Fault-finding Philosophy 6.5.2 Preliminary Checks 6.5.3 User Accessible Fuse Replacement 6.5.4 Video Fault-finding Fault Symptoms Breaks in Transmission Noise Reduction 6.5.5 Audio Fault-finding 6.6 Rate Buffer Setting 6.7 Field/Frame Pictures 6.8 Power Supply Problems/Green LED on Front Panel Unlit 6.8.1 Symptoms 6.8.2 Power LED Unlit Step Action If Result of Action is Yes If Result of Action is No 6.8.3 Fan(s) Not Working/Overheating 6.9 Disposing of This Equipment 6.9.1 General 6.9.2 Lithium Batteries Annex A A. Glossary Page Page Page Page Page Page Page Page Page Annex B B. Technical Specification Page B.1 Inputs B.1.1 Video SDI Table B.1: Serial Digital Video Specification H SYNC Analogue Video Specification Table B.3: Analogue Video Specification Encoder Settings for PAL/NTSC Video Performance Figures The Encoder settings for the PAL/NTSC video performance figures are shown in Table B.4. Table B.4: Encoder Settings for PAL/NTSC Video Performance Figures NTSC Video Performance Figures Table B.6: NTSC System Video Performance Figures Teletext is extracted from the Vertical Blanking Interval (VBI). Pattern Item Specification Teletext Extraction B.1.2 Audio Analogue and Digital Audio Table B.8: Analogue and Digital Audio Specification Table B.9: MUSICAM Analogue Test Specification Embedded Audio (Via SDI) B.2 Test Tones Table B.11: Test Tones Specification B.3 Outputs B.3.1 IF Outputs (1U, E5714) Table B.12: IF OUT MAIN Specification (1U, E5714) Table B.13: IF Monitor Output Specification (1U, E5714) B.3.2 IF Outputs (E5740-IF) Table B.14: IF OUT MAIN Specification (E5740-IF) Table B.15: IF OUT MONITOR Specification (E5740-IF) B.3.3 L-Band Outputs (E5740-LBAND) Table B.16: L-Band Out Main Specification (E5740-Lband) Table B.17: L-Band Monitor Output Specification (E5740-Lband) B.3.4 OFDM Modulator Outputs (E5750) Table B.18: OFDM IF Out 1 Specification (E5750) Table B.19: OFDM IF Out 2 Specification (E5750) B.3.5 ASI Out 1, ASI Out 2, ASI Out 3 Outputs Table B.20: ASI Out Specification B.4 Control and Monitoring B.4.1 Remote Control - Ethernet 1 and 2 B.4.2 Local Control B.4.3 Alarm B.4.4 Remote Control B.4.6 RS-422 Data B.5 Power Supply B.5.1 AC Power Input B.5.2 DC Power Input B.6 Physical Details B.7 Environmental Conditions B.8 Compliance1 B.8.1 Safety B.8.2 EMC2 B.8.3 Shock and Vibration B.8.4 CE Marking B.8.5 C-Tick Mark B.9 Cable Types B.10 Option Modules B.10.1 M2/EOM2/AUDLIN Additional Audio and Linear PCM Option Module B.10.2 M2/EOM2/DAT RS-232 and RS-422 Data Input Asynchronous Data Input Synchronous Data Input B.10.3 M2/EOM2/REMUX Remux Option Module Connectors The M2/EOM2/REMUX Remux Option Module is supported by Encoder software version 2.2.0 and later. Table B.32: DVB ASI In 1, 2 and 3 Connector Table B.33: DVB ASI Out 1 Connector (Disabled) Table B.35: DVB ASI Out 1 - LED Indications B.10.4 M2/EOM2/XLR, XLR Expander Card Option Table B.36: Analogue and Digital Audio (XLR Expander Card) B.10.5 M2/EOM2/DEC, SD Decoder Card Option The M2/EOM2/DEC, SD Decoder Card Option is supported by Encoder software version 3.1 and later. Table B.37: ASI Output (SD Decoder) Table B.38: Composite Video Output (SD Decoder) Table B.39: Digital Video Output (SD Decoder) Table B.40: Audio Output (SD Decoder) Table B.41: Data Output (SD Decoder) B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Table B.42: IF In (QPSK Demodulator) Table B.43: RF In (QPSK Demodulator) B.10.7 M2/EOM2/SATDEMOD, 16QAM Demodulator Card Table B.44: L-band Inputs (16QAM Demodulator) B.10.8 M2/EOM2/IP, IP Output Card Option Table B.45: Ethernet Port (IP Output Card) Page Annex C C. Predefined User Configurations Page C.1 Introduction C.2 525/625 Line Default Settings Table C.1: 525/625 Line Default Settings Lines Frame Rate GOP Length C.3 General Default Settings Page Page Page C.4 Predefined User Configurations Configuration Number Service Name Variable Value Annex D D. Language Abbreviations Languages are shown in alphabetical order. LANGUAGE ABBREVIATION Page Annex E E. Creating and Downloading a Logo Page E.1 Introduction E.2 Summary of Features E.3 OSD Programs Built Into the Encoder Page E.4 Creating a Logo Using OSD Creator E.5 Using OSD Creator E.5.1 Overview E.5.2 Loading a .bmp File E.5.3 Creating Transparency Adding Transparency Manually Adding Transparency Using a Key File Editing the Palette Palette Reallocation E.5.4 Downsampling E.5.5 Saving the .osd File E.6 Downloading a Logo Using OSD Loader E.7 Using the OSD Loader E.7.1 Start-up E.7.2 Download an .osd File Creating and Downloading a Logo Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page E-11 576 Lines 1720 Figure E.6: 625 Line, OSD Co-ordinates in Active Picture 480 Lines Figure E.7: 525 Line, OSD Co-ordinates in Active Picture 1720 720 Pixels Digital Active Picture 702 Pixels Analogue Active Picture E.7.3 Show and Hide Regions E.7.4 Multiple Regions E.7.5 Region Interference E.8 Fault-finding Page Annex F F. Band Plans F.1 Channels and Centre Frequencies........................... F-3 Page F.1 Channels and Centre Frequencies Table F.2: Europe VHF Table F.3: EuropeCATV Table F.4: Italy Table F.5: Morocco Table F.6: New Zealand Table F.7: China Table F.8: OIRT Table F.9: Ireland Table F.10: South Africa Table F.11: French Overseas PIA Table F.12: France Table F.13: Japan Table F.14: USA Table F.15: CCIR Annex G G. Audio Modes Page Audio Modes Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page G-3 G.1 Analogue Audio Figure G.1 shows the coding methods that may be used with the analogue audio input. Figure G.2: Digital Audio Modes PCM r G.3 Embedded Audio on the SDI G.4 Detail of Encoder Operation Figure G.3: Embedded Audio and Stereo Pairs Page Annex H H. Error Messages Page H.1 Introduction H.2 Dealing with Error Messages H.3 General Errors Table H.1: General Error Messages H.4 Video Source Related Errors Table H.2: Video Source Error Messages H.5 VBI Related Errors Table H.3: VBI Error Messages H.6 Remote Control Related Errors Table H.4: Remote Control Error Messages H.7 Data Related Errors H.8 Video Encoder Related Errors Table H.6: Video Encoder Error Messages H.9 Audio Related Errors Table H.7: Audio Error Messages H.10 Satellite Modulator Related Errors Table H.8: Satellite Modulator Error Messages H.11 Remux Related Errors Table H.9: Remux Error Messages Page Annex I I. Accuracy of Frequency Sources Page Page Page J.1 Remux Card In ATSC With Internal PSIP EIT (Event Information Table) 0, 1, 2, and 3 J.2 Remux Card In ATSC With External PSIP Page Page Page K.1 EDH Capability for E57xx Encoders Modified Base Card H/W Mod Strike 11 and below Base Card H/W Mod Mux F/W V14 and below Mux F/W V15 Base Card Not Modified Base Card Strike 12 and above Software versions 2.0.0 and above (excluding 3.0.1) Page Indexes 1 2 3 4 B C D E F G H I K L M N O P Q R S T U V W X Setup Menus and Associated Options Index 1 A B C D I M O R S V