TANDBERG E5714, E5740 B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card

Technical Specification
Page B-26 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
B.10.6 M2/EOM2/QPSKDEMOD, QPSK Demodulator Card
Option
NOTE…
The M2/EOM2/QPSKDEMOD, QPSK Demodulator Card Option is supported by Encoder software
version 3.1 and later.
Table B.42: IF In (QPSK Demodulator)
Item Specification
Safety Status: SELV
Connector Type: BNC Female
Connector Designation: IF IN
Input Impedance: 75 W
Input Power: -20 dBm to –40 dBm
Input Frequency: 50 MHz to 180 MHz
Capture Range: Up to ± 5 MHz
Signal Type: BPSK as per ETSI TR 101 198 (option)
QPSK as per EN 300 421 (DVB-S)
Symbol Rate: 1 – 45 Msy m/s (0.3 – 45 Msym/s optionally)
Table B.43: RF In (QPSK Demodulator)
Item Specification
Safety Status: SELV
Connector Type: F-type Female
Connector Designation: RF1, RF 2
Input Impedance: 75 W
Input Power: -25 dBm to –65 dBm
Input Frequency: 950 MHz to 2150 MHz
Capture Range: Up to ± 5 MHz
Signal Type: BPSK as per ETSI TR 101 198 (option)
QPSK as per EN 300 421 (DVB-S)
Symbol Rate: 1 – 45 Msy m/s (0.3 – 45 Msym/s optionally)