TANDBERG E5714, E5740 Production Info Option, Mixing Level Option, Room Type Option

Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-61
ST.TM.E10076.3
Production Info Option
NOTE…
This option is only shown when the Coding Standard is Dolby Digital (AC-3).
To access the Production Info option, press the Production Info softkey
in the Audio A Menu. This indicates whether the Mixing L evel and Room
Type parameters exist within the bit-stream. The options are On and Off.
Mixing Level Option
NOTE…
This option is only shown when the Coding Standard is Dolby Digital (AC-3) and the Production Info
parameter is set to On.
To access the Mixing Level option, press the Mixing Level softkey in the
Audio A Menu. This parameter indicates the acoustic sound pressure level
of the dialog level durin g the final audio mixing s ession. This makes it
possible for the programme to be replayed at the same loudness or at a
known difference from the original.
This menu assumes a working knowledge of Dolby Digital encoding
processes on the part of the user.
Table 4.58: Mixing Level Options
Selected Option Description
0 dB to 31 dB Mixing levels between 0 dB to 31 dB.
Room Type Option
NOTE…
This option is only shown when the Coding Standard is Dolby Digital (AC-3) and the Production Info
parameter is set to On.
To access the Room Type option, press the Room Type softkey in the
Audio A Menu. This parameter indicates the type and calibration of the
mixing room used for the final audio mixing session.
Table 4.59: Room Type Options
Selected Option Description
Not Indicated
Small, Flat Mon Type and cal ibration of the mixing room used
Large, X Curve Mon for the final audi o mixing session.