Technical Specification
Page B-4 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Analogue Video Specification

Table B.3: Analogue Video Specification

Item Specification
Analogue input 625 line composite PAL-B, -D, -G, -H, -I
525 line composite NTSC-M, PAL-M as specified in ITU-R report 624-4, Characteristics of
Television Systems (NTSC with and without set-up of 7.5 IRE)
Connector designation COMP VIDEO
Connector type 75 W BNC socket
Input level 1 V pk-pk nominal ±5%
Return loss Better than 30 dB up to 6 MHz (when impedance is set to 75 W)
Input impedance 75 W/High Z switchabl e (powered-down impedance = 75 W)
NOTE…
The inputs are isolated from the chassis to prevent 50 Hz/60 Hz hum.
Encoder Settings for PAL/NTSC Video Performance Figures

The Encoder settings for the PAL/NTSC video performance figures are

shown in Table B.4.

NOTE…
The PAL and NTSC video performance figures are measured when the Encoder is connected to a
calibrated Receiver.

Table B.4: Encoder Settings for PAL/NTSC Video Performance Figures

Item Specification
Noise reduction Off
Video bit-rate 8 Mbit/s
Resolution 720 x 576
GOP IBBP
Profile 422P@ML
Packet length 188
Mux Bit-rate 40 Mbit/s
PAL Video Performance Figures

Table B.5: PAL System Video Performance Figures

Pattern Item Specification
Input return loss 30 dB
VITS Line 17 Bar amplitude ref (bp) 700 mV ± 7 mV
VITS Line 17 Jitter 5 ns pk-pk
VITS Line 17 Luminance bar tilt ±0.2%
VITS Line 17 2T pulse K-rating ±1.0% KF