TANDBERG E5714, E5740 4.14 IRD Menu (3.1 and later)

Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-105
ST.TM.E10076.3
4.14 IRD Menu (3.1 and later)
4.14.1 Overview
NOTE…
This option is available in Build version 3.1.0 and later.
The IRD Menu is selected from the Setup Menu by pressing the IRD
softkey.
The menu controls the internal receive r decoder (IRD), if it is fitted. The
IRD consists of the SD Decoder option M2/EOM2/DEC and either of the
following demodulator options, M2/EOM2/QPSKDEMOD or
M2/EOM2/SATDEMOD.
4.14.2 IRD Mode Option
To access the IRD Mode option, press the IRD Mode softkey in the IRD
Menu.
Table 4.132: IRD Mode Options
Selected Option Description
Independent The IRD operates completely independently from the Encoder.
Tracking The IRD tracks, as far as is possible, the modulator settings, minimising the amount of
set-up required to monitor the local modulator output.
4.14.3 IRD TS Source Option
To access the IRD TS Source option, press the IRD TS Source softkey in
the IRD Menu.
Table 4.133: IRD TS Source Options
Selected Option Description
IRD Demod The IRD will decode the transport stream from the demodulator.
Internal TS The IRD will decode the host Encoder’s internal transport stream.