Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 4-107
ST.TM.E10076.3
4.14.4 IRD Demod Menu
Frequency Option
To access the Frequency option, press the Frequency softkey in the IRD
Demod Menu.
This value is either the L-Band frequency for the demodulator to tune to if
the LNB option is se t to ‘Direct RF’, o r it is the satellite fre quency to tune
to if the LNB option is set to ‘Active’.
If the demodulator is M2/EOM2/QPSKDE MOD, and the IF inpu t is selected,
then this value is the IF frequency to tune to.
Symbol Rate Option
To access the Symbol Rate option, press the Symbol Rate softkey in the
IRD Demod Menu. If the IRD is in tracking mode then this value is tied to
that set for the sa tellite modulator, and cannot be altered.
Table 4.134: Symbol Rate Options
Valid Input Range Description
Min (Low Sym Rate) 0.3000 Msym/s Minimum with low symbol rate option M2/ES02/LSYM
Min 1.0000 Msym/s
Max 30.0000 Msym/s
Stepsize 0.0001 Msym/s
FEC Rate Option
To access the FEC Rate option, press the FEC Rate softkey in the IRD
Demod Menu. If the IRD is in tracking mode this value is tied to that set for
the satellite modulat or, and cannot be alt ered.
Table 4.135: FEC Rate Options
Selected Option Description
1/2 IRD uses 1/2 FEC Rate
2/3 IRD uses 2/3 FEC Rate
3/4 IRD uses 3/4 FEC Rate
5/6 IRD uses 5/6 FEC Rate
7/8 IRD uses 7/8 FEC Rate
8/9 IRD uses 8/9 FEC Rate - only applicable if the modulation type is 8PSK