Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page 3-19
ST.TM.E10076.3

NOTES…

1. Pre-encoded signals cannot be reconstructed on the analogue outputs.

2. Pre-encoded signals will raise an alarm on the digital output.

Figure 3.7: XLR Expander Card Option (M2/EOM2/XLR)

The XLR Expander Card option comprises Assembly S12556 and Card

S12557. See Table 3.1 for the slots that it ca n be installed in.

Audio In Connector

Two XLR female connectors provide a stereo

pair. Each connector carries a single channel

of an analogue stereo pair.

Digital audio is carried on the

left connector.

Table 3.9: Audio In L AES/EBU Connector

XLR IN L, AES/EBU

Pin Analogue Digital

1 Screen Screen
2 Channel (+) AES/EBU (+)
3 Channel (-) AES/EBU (-)
Nominal input
impedance 600 W or 20 kW110 W

Table 3.10: Audio In R Connector

XLR IN R

Pin Analogue Digital

1 Screen
2 Channel (+) Not available
3 Channel (-)
Nominal input
impedance 600 W or 20 kW
Audio In L Audio In R
AES/EBU
PUSH
P
U
1
2
3
1
2
3
Analogue /AES_EBU Left
(Balanced)
Analogue Right
(Balanced)
XLR Expander Card Option
Tx Processor
Analogue /AES_EBU Left
(Balanced)
Analogue Right
(Balanced)
To Encoder
Rx Processor
4 x AES_EBU (Embedded)
Decoder x 2
Off