TANDBERG E5714, E5740 4.14.9 IRD VBI Menu,

Operating the Equipment Locally
Page 4-116 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
4.14.9 IRD VBI Menu
VITS Enable Option
To access the VITS Enable option, press the VITS Enable softkey in the
IRD VBI Menu.
Table 4.156: VITS Enable Options
Selected Option Description
Disabled VITS test signal insertion disabled.
CCIR CCIR[ITU-R] VITS inserted on lines 17/18/329/330 (625 Lines).
FCC/UK 525 Li ne: FCC VITS inserted on lines 17/280
625 Line: UK standard VITS inserted on lines 19, 20, 332, 333
CCVC Enable Option
To access the CCVC Enable option, press the CCVC Enable softkey in the
IRD VBI Menu. This can either enable or disable the reinsertion of Closed
Caption or VCHIP data in to the VBI.
VITC Enable Option
To access the VITC Enable option, press the VITC Enable softkey in the
IRD VBI Menu. This can either enable or disable the insertion of the VITC
signal.
GCR Enable Option
To access the GCR Enable option, press the GCR Enable softkey in the
IRD VBI Menu. This can either enable or disable the insertion of the Ghost
Cancellation Reference (GCR) signal on line 19 for 525 line signals, or line
318 for 625 line signals.
NOTE…
The GCR signal only appears on the SDI output NOT the analogue output.
Status Only Options for the IRD VBI Menu
The following options are for status only and cannot be changed.
· CCVC Status: present or not present on the input signal.
· VBI Status: present or not present on the input signal.
· Input Lines: what, if any VBI is present o n each input line.
· Output Lines: what, if any VBI is present on each line output.