TANDBERG E5714, E5740 B.9 Cable Types

Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Enco d er Page B-19
ST.TM.E10076.3
B.8.4 CE Marking
The CE mark is affixed to indicate compliance with the following
directives:
89/336/EEC of 3 May 1989 on the approximation of the laws of the
Member States re lating to electromagn etic compatibility.
73/23/EEC of 19 February 1973 on the harmonisation of the laws of the
Member States relating to electrical equipment designed for use within
certain voltage limits.
NOTE...
The CE mark was first affixed to this product in 2001.
B.8.5 C-Tick Mark
The C-Tick mark is affixed to denote compliance with the
Australian Radiocom munications (Complian ce and Labelling –
Incidental Emissions) Notice made under s.182 of
Radiocommunications Act 1992.
NOTE...
The C-Tick mark was first affixed to this product in 2001.
B.9 Cable Types
The signal cable types (or similar) in Table B.29 are those recommended
by TANDBERG Telev ision in order to maint ain product EMC comp liance.
Table B.29: Suitable Signal Cable Types
Signal Type Connector Cable
RS-232 9-way D-type Male Belden 8162 CM 2PR24 shielded E108998 (typical)
Ethernet RJ-45 Alc atel Data Cable FTP 7 x 0.16
ASI Outputs BNC Canford Audio BBC 1/3 PSF (type 2 Video cable)
SDI In (Video Input) BNC Canford Audio BBC 1/3 PSF
H SYNC BNC Canford Audio BBC 1/3 PSF
Composite Video (Input) BNC Canford Audio BBC 1/3 PSF
Audio (Input) 15-way D-type Male Canford Audio DFT 110 Ω
RF BNC Canford Audio BBC1/3 PSF
Audio Out
(XLR Expander Card)
XLR Canford Audio DFT cable