TANDBERG Codec C90 and Profiles using C90 | Administrator guide |
ContentsContents
IntroductionIntroduction
AdvancedAdvancedconfigurationconfiguration
PasswordPasPa swordprotectionrotectiontection
AboutAboutmonitorsonitors
AudioAudiomattersat ers
AppendicesAppendices
ContactContactusus
Password protection
The system can be password protected in three ways:
•The Advanced menu can be password protected with a menu password.
•The Codec can be password protected with an administrator password.
•The Web interface is password protected with the same administrator password as for the codec. NOTE! Requires a reboot of the codec.
NOTE! When a new password has been defined make sure you save a copy of the password in a safe place. Contact your TANDBERG representative if you have forgotten the password.
Setting the codec administrator password
To define the administrator password on the codec:
1.Connect to the codec through the network or the serial data port, using a command line interface (ssh, telnet or scp)
2.Log in to the codec with user name (admin) and no password.
3.Run the following API command and enter a password: xCommand SystemUnit AdminPassword Set Password: “****”
4.The password format is a string with
5.Reboot the codec.
Password protection of the web interface
The web interface is password protected with the same user name and password as defined for the codec.
NOTE! To activate the administrator password on the web interface, after having defined or changed the administrator password, a reboot of the codec is required. Without a reboot the administrator password will only apply when you log in to the codec.
Setting the menu password
To define a password for the Advanced menus:
1.In the
2.The password is a string with
3.Enter the new password in the Set password menu
4.Press Save.
Log in to the Advanced menu
When a password is set, the password is required to get access to the Advanced menu on screen.
How to change the menu password
1.To change the password, go to Home > Settings > Advanced > Set menu password.
2.Enter the new password in the Set password menu
3.Press Save.
Log in to the codec or the web interface
•You can log in to the codec with the user name and password, either from a web interface or from a command line interface. You will need to enter both the user name and password.
•The user name is admin, and cannot be changed.
How to deactivate the administrator password
1.Connect to the codec through the network, using a command line interface (ssh, telnet or scp).
2.Login to the codec with the required user name (admin) and password.
3.Run the following API command with a blank password: xCommand SystemUnit AdminPassword Set Password: ““
4.Reboot the codec.
How to deactivate the menu password
1.To deactivate the password, go to Home > Settings > Advanced > Set menu password.
2.Leave the input field empty in the Set password menu.
3.Press Save to save the blank password. This will deactivate the menu password.
38 | www.tandberg.com |
