Optional Items, Supplies | Tandberg Data Tandberg LTO2 guide

Appendix B Optional Items and Supplies

Optional Items

The items listed below are available for the Autoloader. Please advise your dealer of the product name and part number at the time of purchase.

Table-B1 Optional Items

Product Name	TD P/N	Specification

LTO1 Data cartridge	432630-1	See Appendix A.

LTO2 Data cartridge	432744	See Appendix A.



Magazine, LTO media (7 slots)	432664	Same as the magazine
Magazine, LTO media (7 slots)		supplied with the Autoloader.
		supplied with the Autoloader.
LTO Bar Code Label	432665	100
		100

Supplies

The items listed below are available for the Autoloader. Please advise your dealer of the product name and part number at the time of purchase.

Table-B2 Supplies

Product Name

P/N

Specification

	Cleaning cartridge	432631	Used to clean the heads
			of the Autoloader .

	Roller cleaner set	432669

	Filter Element	432697	Replace the Filter Element
	Filter Element	432697	every 6 months.
			every 6 months.

- 63 -

Image 79

Tandberg Data Tandberg LTO2 manual Appendix B Optional Items and Supplies

Contents

Tandberg LTO2 Autoloader Trademarks FCC Class B Notice Description example in this manual Safety Descriptions Mandatory action Prohibited action General Cautions Safety Cautions Do not apply starburst wiring Do not lift the device alone Do not cover the air inlet Do not disassemble, repair or modify by yourself Vii Figure Ⅰ Warning Label ① Revision History Contents Chapter Troubleshooting Chapter Daily MaintenanceChapter Cartridges Introduction Organization of this manual Symbols used in this manual Symbols used in this manualTip Overview of the Tandberg LTO2 Autoloader Tandberg LTO2 Autoloader Front Panel of the Tandberg LTO2 Autoloader Names and Functions of the Parts ･ Enter key Rear Panel of the Tandberg LTO2 Autoloader Liquid Crystal Display LCD Liquid Crystal Display Cartridges Handling PrecautionsTransfer or Disposal of the Device Main Unit Contents of the Carton Preparation Before Use SetupTransporter Locking Screw Instruction TAG Storing the Transporter Locking Screw for later use Scsi Cable Connections AC Power Cable Connection AC Power Cable Connection Attaching and removing a Filter Element Attaching and removing the Filter Element Scsi ID Setting Switching on the Power Switch and the Power-On Sequence Start and Shutdown of the System Removal of the Magazine Operation Loading the Magazine Loading the Magazine Loading to Magazine Loading the Cartridge Loading to the Fixed Slots For using the Tandberg LTO2 Autoloader w/BCRs optionalOperation Examples For using the Tandberg LTO2 Autoloader w/BCR Removal from and Insertion to the Magazine Removal and Insertion of the Cartridges Display Eject Slot? Removal from and Insertion to the Fixed Slots Slot Logical Numbers Organization of the Front Panel SwitchesFunctions of the Switches Operation of the Panel Keys Panel Operation Procedure Display Frm Slt 1? Menu Tree 1 Main Menu Menu Commands Retry Mode Checking the Scsi ID Setting the Scsi ID Operation Example Changing the Scsi ID Tip Display Drv. ID 0? Using the Emergency Release Key Using the Emergency Release Key Cartridges Cartridges Data Cartridge Cleaning Cartridge Setting the Write-protect Switch Write-Protect Switch Bar Code Label Using Bar Code Labels Precautions General Precautions Usage Precautions Standards for Prohibition of Use Service LifeStorage of Data Cartridges Cleaning Daily MaintenanceCleaning of the Drive Head Manually Cleaning of the Drive Head Default CLNROL-function setting Enable Cleaning the Roller inside of the transporterChecking the CLNROL- function Setting the CLNROL- function Disable RtyCnt value in the CLNROL-function Changing the RtyCnt valueOperation Example Tip Execution timing of the cleaning Cleaning of the Roller Tools and Parts Setting Maintenance mode Cleaning the Roller Setting Cleaning mode Shows the upper Roller after cleaning Tip 12 shows the upper Roller after cleaning Operation Cleaning of the interior Cleaning of the Main UnitCleaning of the exterior Cleaning of the fixed slots Cleaning of the cartridge Cleaning of the magazine Movement and Shipping of the Autoloader Phenomenon Recovery Procedure Power Supply Troubleshooting Connections Phenomenon Recovery Procedure Cartridge Operation Cleaning Phenomenon Recovery Procedure Autoloader PerformanceOthers Recovery Procedure P move system initialization Exceeding the recommended operation Other Matters to Check When Requesting Maintenance Autoloader Main Unit Appendix a Specifications LTO2 Data Cartridge TD P/N LTO1 Data Cartridge TD P/N Universal cleaning cartridge TD P/N Optional Items Appendix B Optional Items and SuppliesSupplies CMer Error Code Appendix C Error Code Err ×××× Messages Related to the Drive Interface Messages Message Description Panel Operation and Other Messages Tandberg Data ASA Kjelsasveien 161 N-411 Oslo Norway Tandberg LTO2 Autoloader Installation and User’s Manual