Tandberg Data Tandberg LTO2 manual Loading the Magazine

Models: Tandberg LTO2

1 85
Download 85 pages 53.95 Kb
Page 31
Image 31

3.2 Loading the Magazine

Follow the procedure described below to load the magazine into the Autoloader.

1. Check that the power of the Autoloader is ON.

Tip

The Autoloader has a double locking mechanism comprising a key operated door lock and an electronic lock. When the power is in the OFF condition, the electronic lock is activated by a solenoid and the door cannot be opened. When it is necessary to open the door while the power is in the OFF condition, use the emergency release key that has been supplied. See “3.8 Using the Emergency Release Key” for information describing the use of the emergency release key.

2.Use the door lock key supplied with the main unit to release the door lock, then open the front door.

Tip

The Autoloader is designed so that the electronic lock operation will again be activated if the front door is not opened within 10 seconds following the release of the door lock with the door lock key. Should the door become locked again, follow this same procedure to release the door lock and then open the front door within 10 seconds.

3.Set the magazine as indicated in the figure and press the PUSH mark portion back until it locks with a click sound.

4.Close the front door and lock it using the door lock key supplied with the main unit.

Figure 3-3 Loading the Magazine

- 15 -

Page 31
Image 31
Tandberg Data Tandberg LTO2 manual Loading the Magazine