Cautions for power source or power cable

WARNING

Do not handle the power plug with wet hands.

Do not connect/disconnect the plug with wet hands. Otherwise, an electric shock may occur.

CAUTION

Do not insert the plug

into the outlet other than the one specified.

Use the wall outlet of specified voltage and power source. Use of power sources other than the one specified may cause a fire or electrical leakage.

Do not apply starburst wiring.

This device may overheat when current exceeds the rated value, which may cause a fire.

Do not insert the plug halfway.

Insert the plug to the end. Inserting halfway generates heat from the loose connection and may cause a fire. The plug also generates heat when dust or droplets adhere to the inserting part, which may cause a fire.

Do not use the power cable other than the one specified.

Do not use the power cable other than the one attached to the device May cause a fire when current exceeds the rated value.

In addition, to prevent from an electric shock or a fire caused by damage of the power cable, do not perform the following actions.

Pulling the power cable Pinching the power cable Bending the power cable

Pouring chemicals on the power cable Twisting the power cable

Placing items on the power cable Bundling the power cable

Modifying, processing or repairing the power cable Fixing the power cable with staples, etc.

Do not use a damaged power cable (replace damaged power cable with one with the same specification. For replacement, contact the

dealer from whom you purchased this device or a maintenance service company).

- iv -

Page 6
Image 6
Tandberg Data Tandberg LTO2 manual Do not apply starburst wiring