ValidatorTM Running Manual Tests |
Placing Tone On a Cable Pair
1.Select Manual Tests. Choose Data, Phone or
2.The Manual Test Menu for the cable type you selected displays.
3.Select Tone.
4.Select the desired Tone Sound. Press Accept. The cursor moves to the Tone Path dialog box. (Figure 5.6)
5.Select the Tone Path by choosing the cable pair or pairs you wish to apply Tone to. Press Accept.
6.Using the appropriate cable assembly, connect the cable to the Main unit jacks.
7.Press the Send (F1) soft key to start the tone.
8.Using a Tone Tracer, such as
Data Tone Untitled1.job
| 2005 Aug 25 | |
100% | 10:53:01 | VALIDATOR |
Tone Sound:
High - Low |
Tone Path:
all 
Press send to begin.
SEND
Figure 5.6 Tone Generator
70
