Test-Um NT955 operating instructions Test Ports and Cable Adapters

Test-Um NT955 Series ValidatorTM Introduction

Test Ports and Cable Adapters

Validator-NT is equipped with four dedicated ports for testing data, telephone, coax, and 2-wire cable types.

Data Jack	RJ45 8-wire data interface
Telephone Jack	RJ11, 6-wire Telco interface
	USOC pairing
Coaxial Connector	“F” connector coax interface
Banana Jacks	2-wire testing

The Validator-NT test kit is supplied with five cable assemblies designed to connect to the data, telephone, coax, and 2-wire ports of the main or remote Validator-NT units. A set of 8 wiremap remotes (TP610) are also included in this test kit.

TP74 4” sacrificial cable with RJ45 connectors

TP20 7.5” no fault cable assembly with RJ11 connectors for the RJ11 or RJ45 port

TP55 12” shielded cable assembly with RJ45 connectors

TP68 24” cable assembly with an RJ45 connector and 8 alligator clips

TP62 Adapter, BNC plug to F jack

Note: It is recommended that you leave the TP74 Sacrificial Cables connected to prolong the life of the RJ45 network cable port of your Validator-NT main and remote unit.