Test-Um NT955 operating instructions Shutdown Timeouts

Test-Um NT955 Series ValidatorTM Setting Up the Test Tool

1.3. Shutdown Timeouts

A Power Save mode is installed in Validator-NT to conserve battery life (see Figure 1.4). When the pre-set time limit is reached without any key input the main unit screen will begin to blink. Pressing any key will bring back the full screen and reset the timer.

Select preferences for the timeframes in minutes that you wish the Backlight, the Validator-NT Operating System, and the Tone Generator to automatically shutdown and timeout in order to preserve battery life. Click the down arrow on each drop down dialog box and select the number of minutes desired before each function turns off. Press Accept, then press Set (F1) to initiate your selections and return to the Setup screen.

Shutdown Screen

Untitled1.job

100%

2005 Aug 25 Test--UmIInc..

10:53:01 VALIDATOR

Backlight Shutdown (min):

15

System Shutdown (min):

Tone Generator Timeout (min):

30

15

Set

Figure 1.4 Shutdown Settings

32