Test-Um NT955 operating instructions Cable Test Schedule

Test-Um NT955 Series ValidatorTM How AutoTest Works

4.1. Cable Test Schedule

The Cable Test Schedule displays all the individual cable runs associated with the open job. For your convenience when testing, you can sort each field in the Cable Test Schedule in ascending or descending order. To sort the Cable Test Schedule, move the highlight to a cell in the column to be sorted and press the SORT (F4) soft key. The column is sorted first in ascending order. A second press sorts by descending order and toggles between the two on subsequent presses.

To test a cable on the list, highlight the Cable ID you wish to test. Attach that cable to the appropriate connector on the main unit. Attach the remote unit to the other end of the cable you wish to test.

With the remote connected to the cable, the test function can be started. Press TEST (See Figure 4.2). You will hear relays switching in the main unit and remote. A link is established with the remote, and Validator-NT begins testing the cable to the parameters that have been defined for its type. If it is network cable, Validator-NT will perform full Signal to Noise Ratio and Skew testing as well as Speed testing with a Bit Error Rate Test (BERT) in approximately 23 seconds.

VALIDATOR-NTTM

Job Manager				2005 Aug 25 Test-Um Inc.
Untitled1.job		100%		10:53:01	VALIDATOR
	File Name		Modified			File Size
	Magicworld.job		13.17	Tue 2005 Oct 05		13 K
	Test-um.job		10.21	Wed 2005 Oct 06		25.1 K
	Technicolor.job		9.51	Fri 2005 Oct 08		11.7 K
	Untitled1.job		10.00	Mon 2005 Oct 11		5.7 K

OPEN COPY RENAME DEL JOB

ACCPT

QUIT

SEL

MENU

TEST

1	2ABC	DEF
GHI 4	5JKL	MNO
PRS7	TUV

*

Figure 4.2 Test Button

54