User’s Manual 4-19
Operating Basics
O
PERATING
B
ASICS
❑Do not configure the Display automatic power off function to run while the
"TOSHIBA HD DVD PLAYER" is running.
❑The Windows Aero function is disabled while the "TOSHIBA HD DVD
PLAYER" is running.
Display Devices & Audio❑"TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to
"Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab
in the "Display Settings". To open the Display Settings, click Start → Con-
trol Panel → Appearance and Personalization → Personalization
→ Display Settings.
❑If the HD DVD Video image is not displayed on an external display or tele-
vision, stop the "TOSHIBA HD DVD PLAYER", and change the screen res-
olution in "Resolution" on the "Monitor" tab in the "Display Settings".
However, video cannot be output to some external displays and televisions
due to output or playback conditions.
❑An HDCP compatible HDMI input is required on external displays or televi-
sions to view video being played in the "TOSHIBA HD DVD PLAYER" on
an external display or television.
❑When viewing on an external display or television, use an HDMI cable to
connect the external device to the HDMI out port and change the display
device before playing. The display device cannot be changed during play-
back.
❑HD DVD Video can only be displayed on the computer's display panel or
televisions connected to the computer's HDMI out port. HD DVD Video
cannot be displayed on televisions connected to the S-Video output connec-
tor or external displays connected to the RGB connector. In addition, HD
DVD Video cannot be displayed simultaneously (in clone or Dualview
modes) on the computer's display panel and an external display or television.
❑Do not change the screen resolution while running the "TOSHIBA HD DVD
PLAYER".
❑Audio output through the S/PDIF cannot be recorded when playing an HD
DVD in the "TOSHIBA HD DVD PLAYER".
❑Audio data of more than 48 kHz/16 bit will be down sampled to 48 kHz/16
bit.