HW Setup and Passwords
If there are only 2 HDDs, the Boot Priority Options setting will be like the fol- lowing.
You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:
USelects the USB diskette drive. N Selects the Network.
1 Selects the primary HDD.
2 Selects the secondary HDD. C Selects the
This procedure does not affect the settings.
*In this computer,
To change the boot drive, follow the steps below.
1.Hold down F12 and boot the computer.
2.Use the up/down cursor keys to select boot device you want and press
Enter.
❑If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.
❑The selection method above does not change the boot priority settings in HW Setup.
❑If you press a key other than one of those above or if the selected device is not installed, the system will boot accord- ing to the current setting in HW Setup.
HW SETUP AND PASSWORDS
User’s Manual |
