Toshiba FS-3600 owner manual Split by Seat Number

Chapter 3 - Guest Check Functions Split a Check

3.8.2Split by Seat Number

To split checks into separate checks using {SEAT~NUMBER}

requires the option USE SEAT # in the System Config Table be set YES.

Procedure

1.Recall the check.

•If seat numbers were not entered prior to sending the check (i.e. all items are assigned to seat #1), items can be reassigned using the {CHANGE~SEAT} key (see procedure on page 3-16).

2.Press {SPLIT~BY~SEAT}.

3.Screen prompts: Enter number of checks

4.Index the number of new checks to create from this check and press {ENTER}.

•A list of new check numbers display across the top of the screen.

•Below the check buttons display a list of the seat numbers entered on the check.

5.Touch a check button, and then touch each of the seats that should be split to this check.

6.Continue until all seats have been assigned to the correct check.

7.Press {SPLIT}.

8.A list of the new check numbers display.

•To print one check, touch the button of the check and press

{PRINT}.

•To print all the new checks, press {PRINT}.

9.Press {DONE} to exit the split check screen.

10.End the service round by pressing {MEDIA}, {PRINT~CHECK} or {TOTAL}.

FS-3600 Owner’s Manual 3-31