Chapter 3 - Guest Check Functions | Combine Checks |
3.10.5 Combine Stored Checks to One Table
This procedure is identical to using {ADD~TO~TABLE} except it
depends on ONE CHK/TBL in the System Setup/System Config. Table (page 4 #2).
•YES will add items from both checks to the resulting check.
•NO will add a separate check to the table number.
ONE CHK/TBL set to NO
1.Enter items for a new check, or recall a stored check.
2.Index the table number of the check to which the current check will be combined.
3.Press {TABLE~#}.
• The current check becomes a separate check for that table.
ONE CHK/TBL set to YES
1.Recall a stored check.
2.Index the table number of the check to which the current check will be combined.
3.Prompt line displays message:
Change table?
4.Press YES.
5.Screen displays a message “Check still opened” then prompts:
Add Check?
6.Press YES.
•Items from the current check are added to the check number entered. That check now displays on the screen.
7.End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.
