Toshiba RAV-SM560BT-E, RAV-SM800AT-E, RAV-SM800UT-E, RAV-SM560UT-E Heating Auto, Operation

No.	Item		Outline of specifications				Remarks
3	Room	1) Adjustment range Remote controller setup tem-
	temperature		perature (°C)
	control
				COOL/	Heating	Auto
				DRY	operation	operation
			Wired type	18 to 29	18 to 29	18 to 29
			Wireless type*	18 to 30	16 to 30	17 to 27

*: Only for 4-way air discharge cassette type

2) Using the item code 06, the setup temperature in						Shift of suction tempera-
	heating operation can be compensated.					ture in heating operation
	Setup data	0	2	4	6
	Setup temp.	+0°C	+2°C	+4°C	+6°C
	compensation

			Setting at shipment
			Setup data	2
4	Automatic	1)	Based on the difference between Ta and Ts, the
	capacity control		operation frequency is instructed to the outdoor unit.
	(GA control)
5	Air speed	1)	Operation with (HH), (H), (L), or [AUTO] mode is		HH > H > L > LL
	selection		performed by the command from the remote controller.
		2)	When the air speed mode [AUTO] is selected, the air
			speed varies by the difference between Ta and Ts.
			<COOL>

Ta ( C)		A
+3.0
	HH	B
+2.5
	(HH)	C
+2.0
	H (HH)	D
+1.5
	H (HH)
+1.0
		E
	L(H)
+0.5
	L(H)
Tsc
	L(H)	F
-0.5
	L(L)	G

•Controlling operation in case when thermo of remote controller works is same as a case when thermo of the body works.

•If the air speed has been changed once, it is not changed for 3 minutes. However when the air volume is exchanged, the air speed changes.

•When cooling operation has started, the air speed selects a downward slope, that is, the high position.

•If the temperature is just on the difference boundary, the air speed does not change.

•Mode in the parentheses indicates one in automatic cooling operation.

– 40 –