MODEL C24EA - COVERS AND PANELS
COVERS AND PANELS
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES.
RIGHT AND LEFT SIDE PANELS
NOTE: Removal of left side panel is identical to the procedure for the right side panel.
1.Remove screws from the bottom of panel being removed.
TOP COVER
1.Remove RIGHT AND LEFT SIDE PANELS.
2.Remove the screws securing top cover to rear panel.
2.Pull bottom of panel out and slide down to clear top cover.
3.Reverse procedure to install.
3.Remove the screws securing top cover to front panel. Screws are located on either side of the cooking cavity.
4.Disconnect the delime hose from delime port fitting.
RIGHT SIDE SHOWN
5.Lift top cover off machine.
6.Reassemble parts removed in reverse order.
7.Check machine for proper operation.
F25213 (May 2006) |
| Page 6 of 52 |
|
