Vulcan-Hart C24EA5 208/240V PRO Door Switch, Professional Models, Removal, Installation

MODEL C24EA - SWITCHES, BUZZER AND SOLENOIDS

3.Push handle fully in and keep in position.

4.Position plunger of on/off switch against linkage bracket such that plunger is fully engaged.

3.Disconnect electrical plug from switch.

4.Remove switch from front panel.

5.Reassemble parts removed in reverse order.

A.Adjust switch such that switch plunger is perpendicular with linkage bracket when handle is pushed in fully.

B.Tighten switch mounting screws.

Professional Models

1.Remove the RIGHT SIDE PANEL.

2.Locate the on/off switch mounted to the front panel.

DOOR SWITCH

WARNING: DISCONNECT THE

ELECTRICAL POWER TO THE

MACHINE AND FOLLOW LOCKOUT /

TAGOUT PROCEDURES.

Removal

1.Remove the RIGHT SIDE PANEL.

2.Open cooking compartment door.

3.Note wiring connections and disconnect electrical wiring from switch.

4.Remove switch from door switch mounting bracket. Retain hardware.

Installation

1.Verify E-clip is installed on door switch linkage in groove nearest front panel (if two grooves in linkage are present).

2.Loosely install door switch onto door switch mounting bracket.

Page 29 of 52 F25213 (May 2006)