Vulcan-Hart C24EA5 208/240V PRO Reference Material, Lubrication, Tools, Component, Special

MODEL C24EA - GENERAL

Other chemical properties in water supplies can also affect good steam generation and vary from within each state and locality.

The water level probes in the steam generator tank use ions in the water to detect the water level. Do not use fully demineralized or de-ionized water since it is non-conductive and the water level can not be detected.

NOTE: The use of strainers, or filters will not remove minerals from the water.

Steamers that operate over a long period of time without the benefit of properly conditioned water, which have developed a heavy scale build up, should be cleaned before connecting to a conditioned water supply.

REFERENCE MATERIAL

For replacement parts, refer to Catalog of Replacement Parts F-43123.

For operation, care and cleaning instructions, refer to Installation and Operation Manual F-35428.

LUBRICATION

Component		Lubrication Type
Heating Element		Never Seez
Screws
All NPT Fittings		Pipe Thread Sealant, Loctite
		565
Door Handle		Lubriplate 630AA
Sliding Bracket
	TOOLS

•Standard set of hand tools.

•VOM with A/C current tester (any quality VOM with a sensitivity of at least 20K ohms per volt can be used).

•Anti Static Kit, part no. TL - 84919.

•Pressure Gauge Assembly

•Low Pressure Gauge - 0 to 5 psi. recommended (Grainger Part No. 2C641).

•Water Hose Coupling - swivel type (Grainger Part No. 4KG87).

•Reducer Bushing (Grainger Part No. 6MN61).

•Pipe thread sealant (as required).

Special

•Torque Wrench - Capable of measuring 70 in*lb.

•Aluminum Foil Tape - (McMaster-Carr Part No. 7631A21) or equivalent.

Page 5 of 52 F25213 (May 2006)