MODEL C24EA - COVERS AND PANELS
REAR PANEL
WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES.
1.Remove screws securing top cover to rear panel and rear panel to steamer frame.
SCREW LOCATION
NOTE: If incoming plumbing or drain interferes with rear panel removal, turn off water supply and disconnect plumbing to machine.
2.Remove LEFT SIDE PANEL.
3.Disconnect vacuum relief hose from fitting.
TOP COVER REMOVED FOR CLARITY
4.Pull bottom of rear panel away from machine and plumbing.
5.Reassemble parts removed in reverse order.
Page 7 of 52 |
| F25213 (May 2006) |
|
