Manuals / Wacom / Computer Equipment / Graphics Tablet

Wacom 12WX Adjusting The Display, Factory Presets, Auto-Sync, And Color Calibration, Power Saving

Models: 12WX DTZ-1200W

1 68

Download 68 pages 39.73 Kb

Page 32

ADJUSTING THE DISPLAY

FACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION

Factory presets: For optimal display quality, set your video card to Cintiq’s native resolution of 1280 x 800 pixels (WXGA). See page 56 for signal speciﬁcations.

Auto-sync:The auto-sync function automatically sets the horizontal and vertical screen position, as well as clock and phase. When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. At the native resolution of 1280 x 800, the vertical refresh frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal frequency is between 30 to 82 kHz and the vertical frequency is between 50 to 75 Hz. If a speciﬁc resolution and vertical refresh frequency are not supported, you will see an “invalid mode” message. In this case choose a different resolution or refresh frequency.

If Cintiq does not automatically synchronize with the incoming signal in VGA mode, open the OSD menu, select the VGA IMAGE menu option, and choose AUTO ADJUST to initiate display synchronization. Additional screen display adjustments can be made using the OSD controls.

Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their default settings will invalidate the ICC color proﬁle that was included on the driver CD.

POWER SAVING

Cintiq conforms to VESA and ENERGY STAR® power saving guidelines.

When using Cintiq with a Display Power Management Signaling (DPMS) compliant computer or video card, the display will automatically comply with the below power saving parameters. When these power-saving functions are in effect, the screen display is darker than usual.

Computer mode	H-sync	V-sync	Video	Power consumption	Power lamp
Power ON	Yes	Yes	Active	50 W	Blue
Standby mode	No	Yes	Blanked	2 W	Orange/blue*
Suspend mode	Yes	No	Blanked	2 W	Orange/blue*
OFF Mode	No	No	Blanked	1 W	Orange

*Depending on the speciﬁcations and settings of your computer and video card, the power light may only change to orange when in standby and suspend modes.

Customizing Page 30

Image 32

Wacom 12WX, DTZ-1200W manual Adjusting The Display, Factory Presets, Auto-Sync, And Color Calibration, Power Saving

Contents

Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW PRECAUTIONS PHYSICAL LOCATIONENVIRONMENT Temperature and HumidityThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling CONTENTS InstallationYour new Cintiq Working with your CintiqTroubleshooting AppendixPACKAGE CONTENTS YOUR NEW CINTIQCINTIQ PEN DISPLAY COMPONENTS FRONT VIEWREAR VIEW Power switchRotation pivot Kensington security slotCONVERTER UNIT Power plugUSB-A connector DVI-I video connectorINSTALLATION There are two primary steps to the installation processStep 1 display installation Step 2 pen tablet installation Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color proﬁle will be added to your computer’s color management system during the tablet software driver installation process. To activate this color proﬁle for use with Cintiq, you may need to select the Cintiq 12WX proﬁle in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION USING THE GRIP PEN WORKING WITH YOUR CINTIQBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK ExpressKeys TABLET CONTROLSTouch Strip USING THE EXPRESSKEYS TipsUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ATTACHING THE ACCESSORY FEET ROTATING THE TABLETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION ON SCREEN DISPLAY OSD SETTINGS 1. MENU buttonENTER button 2. Selection buttonsThe basic process for working with the OSD is as follows Reset Main ControlOSD Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 2. If there is no display 3. Verify that the tablet and Grip Pen are workingTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS TESTING A PEN AirbrushDISPLAY TROUBLESHOOTING GENERAL DISPLAY PROBLEMSPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS OBTAINING DRIVER DOWNLOADS USA, Canada, Central and South AmericaEurope, Middle East and Africa JapanCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the ﬁxture USING A MOUNTING FIXTUREAttaching to a ﬁxture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS POWER ADAPTER PEN TABLETGRIP PEN MODEL ZP-501E CONVERTER UNITACCESSORIES ORDERING PARTS AND ACCESSORIES RADIO AND TELEVISION INTERFERENCE FEDERAL COMMUNICATIONS COMMISSION FCC NOTICEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WARRANTY WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Appendix PageWacom Technology Corporation Wacom Europe GmbHWacom China Corporation TelephoneInstallation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W UE-0387