Recording and Playing Back Mute Events, Overdubbing | X2 X2 specification

Mute Automation

events into the current Song. The ONLINE button must be turned on in order for the UPDATE button to function.

Mute Events

Recording and Playing Back Mute Events

The UPDATE button should be thought of as a mute record button. When turned on and the X2 is locked to a sync source (see previous section), any mutes or unmutes are recorded into the currently selected song. Mute events can be recorded by pressing any MUTE button on the console, or by pressing a MUTE GROUP button (1—4). Before recording or playing back mute events, be sure the desired Song is selected.

To record mute events into a song:

1Press the ONLINE button. The ONLINE button will flash.

2Press Play on your tape machine or sequencer (the one providing a sync source). The ONLINE button will stop flashing and remain lit to indicate it is locked.

3Press the UPDATE button.

The UPDATE button will light (if the tape is stopped, the X2 will no longer be locked and the ONLINE and UPDATE LEDs will flash).

4Press any MUTE button to mute or unmute its channel, or press any of the MUTE GROUP buttons to recall a Mute group.

5When finished, press UPDATE. The UPDATE LED will turn off.

JBe sure to turn UPDATE off when done, to avoid recording unwanted mute events.

To playback mute events:

1Press the ONLINE button. The ONLINE button will flash.

2Rewind the tape back to the beginning and press Play.

The ONLINE button will light solid to indicate it is locked and the mute events you recorded will occur at the same position as originally pressed.

Undoing Mute Events

At any time, you can use the UNDO button to delete the most recent mute event. This is very handy when you’ve just made a mistake (i.e., pressed the wrong MUTE button). The UNDO button will always delete the last recorded mute event, and can be used repeatedly in order to back up either a small or great distance, even back to the very beginning (thereby erasing the entire sequence of mute events).

Overdubbing

X2 Reference Manual

61

Image 62

X2 X2 manual Recording and Playing Back Mute Events, Undoing Mute Events, Overdubbing

Contents

Alesis Conventions How To Use This ManualIntroduction Description of Controls. a dictionary of each control X2 Reference Manual Contents Applications Description of Controls Trouble-Shooting Midi Implementation Chart Page Introduction About Monitoring Basic Principles of Mixing & Multitrack RecordingRecording/Tracking Mixdown Introduction X2 Reference Manual Guided Tour Recorder/Mix SystemsPage Aux Send/Return Systems Meter Bridge Control Room SystemsMuting Automation Page Page Connections PowerPower Supply Unpacking and Inspection To connect the power supply to Avoiding Ground Loops To Eliminate HUM if the Above has Failed Unbalanced Line Inputs Channel Inputs and OutputsBalanced Mic Inputs Page Tape Send Direct Output +4/-10 SwitchTape Input Insert Balanced Tape I/O To connect an Elco cable to Group Inserts Stereo Returns and GroupsGroup Outputs Aux a & B Returns Master Inserts Master Inputs and OutputsMaster Outputs Control Room OutputsPage To synchronize the X2 to an Adat system HeadphonesAdat Sync Input Connector Type Examples of Connections Interfacing to an Unbalanced -10 dBV Multitrack Recorder To interface with a typical unbalanced multitrack recorder Interfacing to a Professional +4 dBu Multitrack Recorder Interfacing to the Mixdown Deck Interfacing to Adat Using Elco ConnectorsInterfacing to a Multitrack Recorder via a Patchbay To connect the mixdown deck to Interfacing to the Headphone Amp Interfacing to the Control RoomInterfacing to the Studio Interfacing Aux Sends and Returns to Outboard Effects Connecting Simultaneously, if desired To interface a Midi sequencer with Interfacing the InsertsInterfacing with a Midi Sequencer Recording Setting LevelsApplications II. Maintain Proper Fader Levels Recording a Single Source to One Track To record a single source to a single track Recording Multiple Sources to One Track To record two or more sources to a single track Recording Multiple Sources to Two Tracks Stereo To record multiple sources to two tracks stereo About Metering To select the meter bridge modeRecording Tips To listen to tape tracks on the Channel faders OverdubbingTo listen to tape tracks on the Monitor faders Applications Previous section X2 Reference Manual To route the mix to a headphone amp Getting the Mix to the HeadphonesMonitoring Midi Virtual Tracks To set the level going to the effects device Adding EffectsSelecting an Aux Send To record effects onto the multitrack To hear effects in the monitorsTo hear effects in the headphone/cue mix To bounce one or more tracks to another track mono Bouncing TracksTo record effects onto the mixdown deck To bounce multiple tracks to two tracks stereo Getting the Mix to the Tape Deck Playback/Mix-DownMixdown Basics Here is a simplified step-by-step way to establish a mix Creating a Dependable Mix To create a dependable mix Mute Automation Page Live Performance Using Group Faders as SubgroupsTo configure the X2 mixer in order to achieve a mono mix Creating a Monitor Mix To create two different stage monitor mixes Video Post-ProductionStage Monitor Mix Applications X2 Reference Manual Mute Automation Overview Mute Groups To enable destructive solo modeDestructive Solo Page Defining Mute Groups To define Mute Groups To recall a Mute Group Recalling Mute GroupsOverlay Button To return the console to its previous mute status Selecting a Sync Source Display ModeSynchronization Getting On-line/Locking Undoing Mute Events Mute EventsRecording and Playing Back Mute Events OverdubbingPage Editing Songs Erasing To erase all events on all channels Erase All MemoryTo erase all events on one or more channels To erase a Song including its mute events and 4 Mute Groups Copy Song CopyingCopy Mute Events To copy mute events from one channel to another To set the Midi channel Midi ChannelSelecting Songs via Midi Midi Map Receiving System Exclusive Memory BackupTransmitting System Exclusive Remaining Memory Description of Controls Input Channel Controls Hi and Lo EQ HPF SwitchTo MON Switch Hi Mid and Lo Mid EQ AUX Source Switch EQ in SwitchSwitch Aux 3/4 AUX 1-2, AUX 1-2 PAN Monitor Peak LED Switch Aux 5/6Monitor PAN Monitor Solo Button Channel PAN DIR SwitchGroup Assign Switches 1-2, 3-4, 5-6 Channel Peak LED Aux Master Controls Stereo Aux Return Controls Stereo Separation AUX a Assign Switches Aux a OnlyGroup Masters Switch Aux B Only Balance Solo Button Group Master ControlsButton Mute Button Group 1-8 Master Faders Solo LED and Level Master ControlsOscillator Frequency and Level Studio Level and Assignment Master Faders PhonesControl Room Level and Source Meter BridgePage Mute Automation Controls Display Mute Groups Online Erase FWD and Erase BWD Buttons Memory Remaining Erasing Memory Mute Solo Description of Controls X2 Reference Manual Checking the Software Version TROUBLE-SHOOTINGTrouble-Shooting Index Re-initializing Warranty Information Maintenance/ServiceCleaning and Maintenance Obtaining Repair Service Customers outside the USA Trouble-Shooting X2 Reference Manual Mute Midi Note Number Midi Maps IndexMaps Map Mute Midi Controller Number Map Number Interval Midi Implementation Chart Specifications Input Module Power SupplyMaximum Gain Group Module Total Shipping Weight DimensionsWeight Dimensional Drawings Internal Connector Pinouts Block Diagram Index Solo Song LED 102