Installation into Rack Mount Frame | Xantrex Technology XDI2048

Inverter Module Installation and Operation

Installation into Rack Mount Frame

	WARNING
	During the installation or removal of the inverter, ensure that the power switch
	(see Figure 3-2) is in the off position.

Installing	To install an inverter module, slide it into a pre-wired rack mount frame
	until the mounting ears are flush with the front of the rack. In order to
	prevent the inverter from being accidentally displaced from its proper
	position, apply the captive screws.
	The mating of the inverter with the rack mount frame should be
	established without excessive force. If the unit does not slide into the rack
	mount frame completely, please verify that the rack mount frame was
	assembled and installed into the equipment rack according to “Installation
	Into Cabinet Style Equipment Racks” on page 2–5 or “Installation into
	Relay Racks” on page 2–6.
	The inverter is a forced air cooled device. Please observe that the air
	intake and exhaust are not blocked (refer to “Initial Inspection” on
	page 2–2).
	Please refer to Figure 3-1.

3-2	TM-DIOP-01XN-01

Image 44

Xantrex Technology XDI2048 manual Installation into Rack Mount Frame

Contents

XDI2048 2kVA/1.5kW Page Xantrex Datacom Inverter Date and Revision Purpose ScopeAudience Organization Conventions Used Related Information Important Safety Instructions Page Contents Inverter Module Installation and Operation Troubleshooting Remote Communication & Monitoring Specifications Warranty and Product Information Figures Xii Tables Xiv Introduction Description Features and OptionsInverter Information Features and Functions Ethernet Information Part Number and Ordering Information XDI2048HV-RM Assembly Initial Inspection Packing List Packaging for Shipping or Storage 2Shipping or Storage Carton Label Introduction Rack Mount Frame Rear View Installation Into Cabinet Style Equipment Racks Location, Mounting and Ventilation Installation into Relay Racks Installing into Relay Racks DC Input Wire Connection DC Input PowerInput Connector and Cables Connecting the Input Wires AC Load and Signal Line Connection AC Output ConnectorLoad Wiring AC Output Voltage Wire Load Connection User Line Connection Overview User Line Connector User Line WiringUser Line Connection User Line Connection CAN/SYNC Connection CAN/SYNC ConnectorSpecifications Terminals Function CAN/SYNC WiringCAN/SYNC Pin-out Connection Schemes Stand-Alone OperationParallel Operation Connection Parallel Operation Load Terminal Voltage Split Phase OperationSplit-Phase Operation Three Phase Operation 33-Phase ConfigurationsWiring Output Configuration Terminals Model Voltage Phase Synchronization and Signal Wiring 103-Phase Sync Connection Phase, 3-Wire Delta Output Wiring Phase, 3-Wire Y-Connection Output Wiring Phase, 4-Wire Y-Connection Output Wiring Ethernet PortPage Operation Installation into Rack Mount Frame Installing an Inverter into a Rack 2Inverter Front Panel System Startup Operation of Inverter ModuleTheory of Operation Standby Mode Cooling Fans 2User Line Pins User InterfaceFront Panel User Lines Protections and Alarms OverviewInput Voltage Protection Output Voltage Protection Overload Protection 3Overload curve Over Temperature Protection OTP Internal DiagnosticsShort-circuit Protection Over-Current protection Incorrect Connection Protection Output AC AlarmFuses and Grounding Maintenance To Clear an Alarm 4Replacing the Fan Filters Monitoring Web-enabled User Interface Initial Setup Initial Setup Ethernet Interface PCB How to Setup For the First Time Hardware Setup Setting Default Value Ethernet Setup1Default Settings SettingValue Resetting2User Configured Settings Removing Unit’s Top Cover 3Reset SettingsSetting Reset Value Ethernet Reset Jumper Operating Instructions Network Connection 5Network Setup Using Dhcp What Power On Does Password 6Password Confirmation Boxes Automatic Power-On Email How to Use the Web Interface Manage Object Description Setup 8Setup Page of Web Interface 5Setup Page of Web Interface Monitor 9Monitor Page of Web Interface 6Monitor Page of Web Interface Shutdown Code Code Fault DescriptionAutomatic Shutdown Email TM-DIOP-01XN-01 Troubleshooting Unusual or Erratic Operation User DiagnosticsEmergency Shutdown Symptom Check Diagnostic Guide1Inverter Diagnostics 2Ethernet Diagnostics Specifications Inverter Specifications Electrical Specifications Inverter Specifications Environmental Specifications Regulatory Approvals Mechanical Specifications Inverter and Rack Mount Frame Dimensions Figure A-1 Ethernet Specifications Page Warranty and Product Information Warranty Disclaimer Product Return Material Authorization Policy Exclusions Information About Your System Return ProcedureOut of Warranty Service Page Xantrex Technology Inc