Xantrex Technology XDI2048 manual Ethernet Setup, 1Default Settings, Setting Default Value

Initial Setup

Ethernet Setup

You must run a Web browser to communicate and configure the XDI Ethernet. Microsoft Internet Explorer or Netscape Communicator are such examples.

Important: Ensure that the unit’s IP address is unique on the network. Ensure the computer’s IP address and sub-net mask are compatible with the unit’s. (contact network administrator for details).

Configure Ethernet settings:

1.Run your Web browser program.

2.In the address box type in the “Default IP” (Table 4-1).

3.Select the “Setup” link located on the upper left hand side.

4.Configure the Ethernet settings to your unique setup (see “Setup Page” on page 4–15).

Table 4-1Default Settings

Setting	Default Value
Default IP	192.168.1.1
Gateway IP	0.0.0.0
Sub-Net Mask	255.255.255.0
Domain Name Server 1	0.0.0.0
Domain Name Server 2	0.0.0.0
SMTP (email) Server	none
Email Alert Address	none
Password	12345

Important: Be careful when you change the network settings. If they are changed to a value where communication can not be established any more, a hard reset must be done (see “Resetting” on page 4–6).

TM-DIOP-01XN-01 4-5