Xantrex Technology XDI2048 manual 6Monitor Page of Web Interface

Remote Communication & Monitoring

Table 4-6Monitor Page of Web Interface

Object	Description
Output Voltage	Last measured output voltage (Vrms)
Output Current	Last measured output current (Arms)
Percent Load	Last measured percent load (%). Indicates percentage of
	load being drawn from the inverter with respect to
	maximum load capability
Startup	Status of startup sequence
Fault Status	List of current faults of the inverter (see Table 4-7 on
	page 4–19)
Faults Since Power	List of faults that have occurred since power up (see
On	Table 4-7)
On LED	Indicates state of the inverter:
	Green – Inverter is operating normally
	Yellow – Inverter is running startup sequence, or in
	standby mode
	Off – Inverter’s output is disabled because a fault has
	occurred.
Fault LED	Indicates fault condition:
	Red – Inverter has a fault condition
	Off – Inverter is operating normally
Refresh Data Link	Updates all the data on the page. Select this every time
	the “Monitor Page Refresh Rate” parameter has been
	changed.
Close Window	Closes the page
Link

4-18 TM-DIOP-01XN-01