Xantrex Technology XDI2048 manual Ethernet Interface PCB, Initial Setup

Initial Setup

Important: The only way to configure the interface card is through the Ethernet port using TCP/IP protocol. Therefore, the Ethernet interface must be set up properly the first time. Once it is setup, the parameters (such as, password and IP address) should be saved in a safe place. Table 4-2 is provided to record your settings after they have changed.

[96 mm]
	3.45 " [88 mm]
	Ethernet Board Top View	Ethernet Board Bottom View
Figure 4-1	Ethernet Interface PCB

TM-DIOP-01XN-01 4-3