Xantrex Technology XDI2048 manual Maintenance, To Clear an Alarm

Maintenance

To Clear an Alarm

Depending on the cause of the alarm, the alarm may be cleared automatically as soon as the fault condition has elapsed. In some cases, the alarm is cleared by:

•cycling the ON/OFF switch on the rear panel,

•toggling the Shut_Down user line,

•or toggling between Standby and Active buttons on the Web Browser interface (if Ethernet Option is being used).

Maintenance

Periodic	Whenever a unit is removed from operation, clean the outside surfaces
Cleaning	with a weak solution of soap and water. If required, use low-pressure
	compressed air to blow dust from in and around components on the
	printed circuit boards.
Fan Filter	The XDI is fitted with disposable fan filters which prevent the entry of
Replacement	dust and debris into the unit. These filters should be inspected every six
	months. When the filters become dirty they can be replaced as shown in
	Figure 3-4.

TM-DIOP-01XN-01 3-11