Xerox 701P39116 manual Processing Defaults Menus, Finishing

Processing Defaults Menus

Finishing Page

This description applies to the XES 8830 folder.

Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing

Folder Type - This read-only field displays the type of folder currently connected to the printer. The Web PMT automatically detects the type of folder installed on the printer.

If you entered the printer password in the Session Setup, you can change the following printer defaults for finishing:

1.Folding Options - Click on this list box to select the printer default folding operation. The list box will display all the folding options. You must select a valid folding option for your folder type (the default is NO FOLD).

2.Press the Update Printer button to update the specified parameter changes in the printer.

This description applies to any GFI folder.

Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing

Finisher Version - This read-only field displays the version of the folder currently connected to the printer.

Finisher Model - This read-only field displays the model of the folder currently connected to the printer.

If you entered the printer password in the Session Setup, you can change the following printer defaults for finishing:

1.Programs - Click on this drop box to select from a list of the available finisher programs. Directly below the Programs list is a more detailed description of the currently selected program. Please note that the program description will not change on the WebPMT page until the Update Printer button has been pressed.

2.Tabs - Click on this drop box to select from a list of the available tab override settings. Available options are Always On, Always Off, USE PROGRAM SETTING. Default is USE PROGRAM SETTING

3.Punch - Click on this drop box to select from a list of the available punch override settings. Available options are Always On, Always Off, USE PROGRAM SETTING. Default is USE PROGRAM SETTING

Page 44 Web Print Manager Tool User Guide