Note that
•Pressing the Reset Factory TRCs button will put back the TRC curves for the specified Media Type and Document Type to their factory default values.
•Press the Update Printer button to send the new values to the printer.
3.If you are on the Media Specific Settings Text Form page, do the following:
•For the Media Type listed at the top of the page, select the “Document Type” and “Raster Halftone Method” from the drop down menus.
•Press the Get Settings button. This will show the current settings for the selected media type, raster halftone method, and the selected document type.
•Manually type in the color curve values to adjust the color curves for the selected media type and document type. Note that the values that are entered will be further adjusted by the gamma and ink limit, so if you want to directly modify the input/output you should set gamma to 1.0 and ink limit to 100%.
•Pressing the Reset Page button will reset to the values before you edited this table.
•Pressing the Reset Factory TRCs button will put back the TRC curves for the specified Media Type and Document Type to their factory default values.
•Press the Update Printer button to send the new values to the printer.
Transform Page
Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Transform
If you entered the printer password in the Session Setup, you can change the following printer default settings for scaling, rotation, mirroring and raster image scale mode:
1.Scaling - Click on the Auto or Absolute radio button to select the type of Scaling.
ŸIf Auto is selected, the printer will automatically scale the image to the requested media size. Auto scaling is not allowed for the following paper sizes: ANY, ANY ANSI, ANY ISO, ANY JIS and ANY ARCH.
Web Print Manager Tool User Guide | Page 49 |
