Operator Guide

Safety notes

Electrical safety

Attention to the following requirements ensures the safe operation of your equipment.

Printer

USA/Canada The printer requires a 115V AC outlet, dedicated 20 Amp, 3-wire circuit.

Europe The printer requires a 220-240V outlet, dedicated 13 Amp or 10 Amp circuit.

The equipment must be connected to a grounded mains outlet.

CAUTION

Ensure that the power connection for your printer satisfies these requirements.

The power receptacle for the printer must meet the requirements stated on the data plate on the rear of the printer.

The socket outlet shall be installed near the equipment within reach of the 10 ft. (3 m) cable and shall be easily accessible.

Use the power cable that is supplied with your printer and controller. Do not use an extension cord, or remove or modify the power cord plug.

Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure whether or not an outlet is correctly grounded, consult a qualified electrician.

Do not use an adapter to connect the printer to an electrical outlet that lacks a ground connection terminal.

The power cord is the disconnect device for this printer.

Do not override or disable electrical or mechanical interlocks.

Do not push objects into slots or openings on the printer. Electrical shock or fire may result.

Do not obstruct ventilation openings. These openings prevent overheating of the printer.

DocuTech 65/DocuPrint 65

xiii

Page 17
Image 17
Xerox DOCUTECH 65 manual Electrical safety, Printer