Xerox DOCUTECH 65 manual Recommendations for loading special stock

Operator Guide Paper and other stock

The printer performance for new and recycled 8.5 x 11 inches (216 to 279 mm) or A4 paper for various weights is shown in Table 3-5.

Table 3-5. Printer performance for new and recycled plain paper

Paper Weight
Throughput Material 8.5 x 11 in. or A4	Rating	Note
Less than 16 lb or 61 gsm	x
Between 16-20 lb or 61-75 gsm	o
Between 20-32 lb or 75-120 gsm	l
Between 32-110 (index) lb or 120-203 gsm	o	l
Greater than 110 (index) lb or 203 gsm	x

Recommendations for loading special stock

The common uses and the special requirements for the variety of stock types that the printer can accommodate are shown in Table 3-6.

Table 3-6. Recommendations for loading special stock

Stock Type	Common Use	Recommendation
Hole-punched	Ringed binders	• Use long-edge feed paper for
3 or 4 holes		best imaging speed.
		• Load with holes on the left in
		Trays 5-6.
		• Load with holes on the right in
		Trays 1-4.
Perforated	Pages for partial	• Where possible, load with the
	removal, such as	perforations parallel to the
	order forms and	feed direction.
	receipts
Pre-printed and	Common	• Use ultra-violet cured or
letterhead	correspondence,	oxidative inks to extend the life
	mailings and	of the Feed Roll Cartridges.
	advertising	• Load face up in Trays 1-4.
	materials
		• Load face down in Trays 5-6.

DocuTech 65/DocuPrint 65 3-9