Xerox DOCUTECH 65 manual Printer faults, Clearing printer faults, Paper jams, DocuSP Help

Operator Guide Maintenance

Printer faults

Occasionally, a fault will occur at the printer that may prevent you from using the printer, such as:

•Out of Paper

•Low Dry Ink

•Module/Cartridge end of life

•Paper Jam

NOTE: For detailed information on the Customer Replaceable Units, refer to the DocuTech 65/DocuPrint 65 Operator Guide and the DocuSP Help.

Clearing printer faults

Instructions for clearing faults will be displayed on the controller. Simply follow the instructions.

NOTE: For detailed information on clearing the printer faults, refer to the

Xerox Document Services Platform Series Problem Solving Guide and the

DocuSP Help.

Paper jams

When a paper jam occurs, the controller automatically displays a fault window that lists individual faults. If you choose to display additional information about a given fault, the system will then display instructions or graphics that show the required actions. After the jam is cleared, follow any additional displayed instructions.

If the jam occurred in the middle of your job, the printer will automatically recover and reprint the sheets that were jammed.

NOTE: When removing jammed sheets from the printer, use the green handles and knobs.

The jam clearance areas are shown in Figure 2-6.

DocuTech 65/DocuPrint 65 2-9