Turn on the power
Turn down the volume by turning the [MASTER VOL- UME] control to the left and press the [STANDBY/ON] switch to turn on the power. Pressing the switch again turns the power off.
Backup data in the flash memory (page 49) is loaded to the instrument when the power is turned on. If no backup data exists on flash memory, all instrument set- tings are restored to the initial factory defaults when the power is turned on.
CAUTION
•Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet, and/or remove the bat- teries from the instrument.
CAUTION
•Never attempt to turn off the power during writing, otherwise the data on the instrument may be damaged or lost.
Setting Up
● Music Rest |
Insert the music rest |
into the slots as shown. |