Reference Connecting To a Computer
USB Connection
This instrument can be connected to a computer to allow transfer of MIDI data.
Connect a standard USB cable between the instrument’s
It is also necessary to install the USB driver provided on the supplied
The supplied
USB cable
■USB Precautions
Please observe the following precautions when connect- ing the instrument to a computer via a USB cable. Failure to do so can cause the instrument and/or the computer to hang up (freeze), possibly causing corrup- tion or loss of data.
If the instrument or computer does hang up, turn the power to both devices off and then on again, and restart the computer.
CAUTION
•Wake the computer from a sleep/suspended/standby mode before connecting the USB cable.
•Connect the USB cable to the instrument and computer before turning power to the instrument on.
•Check the following points before turning the instrument’s power on or off, and before plugging or unplugging the USB cable.
•Quit all applications.
•Make sure that no data transfer is in progress (data is trans- ferred whenever you play on the keyboard or play a song).
•Allow at least 6 seconds between turning the instrument’s power on and off, and between plugging and unplugging the USB cable.
•Directly connect the instrument to the computer using a single USB cable. Do not use a USB hub.
NOTE
•The Musicsoft Downloader application may not be able to access the instrument in the following cases:
•When an unformatted SmartMedia card is inserted while the Media Select setting is “SmartMedia”.
•During a MIDI bulk dump.
•While the opening display is showing.
•During style playback.
•During song playback.
•During a file control operation (while the FILE CONTROL display is showing).
•When the Media Select setting is “SmartMedia” but no SmartMedia card is inserted.
MIDI Settings
These settings pertain to MIDI data transmission and reception.
■Local ON/OFF ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Local control determines whether or not notes played on the instrument are sounded by its internal tone generator system: the internal tone generator is active when local control is on, and inactive when local control is off.
ON This is the normal setting in which notes played on the
OFF With this setting the instrument itself produces no sound (keyboard performance, harmony, or style playback), but the performance data is transmitted via the USB con- nector. Data received via the instrument’s USB connec- tor will also be played by the internal tone generator.
Local control can turned on or off via the FUNCTION display Local item (page 72).
NOTE
•If you can’t get any sound out of the instrument, this may be the most likely cause. Playing the keyboard results in no sound when Local is set to OFF.
■External Clock ON/OFF ● ● ● ● ● ● ● ● ●
These settings determine whether the instrument is syn- chronized to its own internal clock (OFF), or to a clock signal from an external device (ON).
ON The instrument’s time based functions will be synchro- nized to the clock from an external device connected to the USB connector.
OFF The instrument uses its own internal clock (default).
External clock control can turned on or off via the FUNCTION display External Clock item (page 72).
NOTE
•If External Clock is ON and no clock signal is being received from an external device, the song, style, and metronome functions will not start.
80
