Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T +10, WEB S, MARK S, Range:, - NONE, MEDIA S, RIBBON S, MARK LED, Default:, MEDIA LED, MARK MED S, RIBBON LED, LCD ADJUST, Selections:, Default: NONE

96Configuration

Control Panel Parameters

Table 9 • Printer Parameters (Page 18 of 19)

Parameter Action/Explanation

		These parameters are automatically set during the calibration procedure
WEB S.	073	and should be changed only by a qualified service technician. Refer to the
-	+	ZPL II Programming Guide for information on these parameters.
		To skip these parameters:
MEDIA S.	075
-	+	1.	Press PLUS (+) repeatedly.
RIBBON S.	071
-	+
-	+
MARK S.	000
-	+
MARK MED S. 000
-	+
MEDIA LED	082
-	+
RIBBON LED	008
-	+
MARK LED	005
-	+
		Adjust LCD Display
LCD ADJUST	+10
		This parameter allows you to adjust the brightness of your LCD if it is
-	+
		difficult to read.
		Default: 10
		Range: 00 to 19
		To change the value shown:
		1. Press PLUS (+) to increase the value (increase brightness).
		2. Press MINUS (-)to decrease the value (reduce brightness).
		Select Format Convert
FORMAT CONVERT
		Selects the bitmap scaling factor. The first number is the original dots per
- NONE	+	inch (dpi) value; the second, the dpi to which you would like to scale.
		Default: NONE
		Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600
		To change the value shown:
		1.	Press PLUS (+) or MINUS (-)to scroll through the options.

11342L-001 Rev. A 105SL User Guide 6/30/06