Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Exit Setup Mode, CANCEL, PERMANENT, TEMPORARY, DEFAULT NET, SAVE CHANGES, LOAD DEFAULTS, PRINTER READY, LOAD LAST SAVE

Configuration 75

Setup Mode

Exit Setup Mode

To leave Setup mode, complete these steps:

1.Press SETUP/EXIT.

The LCD displays SAVE CHANGES.

2.Press PLUS (+) or MINUS (-)to display the save options (Table 8).

Table 8 • Save Options When Leaving Setup Mode

LCD	Description
PERMANENT	Stores values in the printer even when power is turned off.
TEMPORARY	Saves the changes until power is turned off.
CANCEL	Cancels all changes made since you entered Setup mode,
	except for changes made to the darkness and tear-off settings,
	which go into effect as soon as they are made.
LOAD DEFAULTS	Restores all parameters other than the network settings back to
	the factory defaults. Use care when loading defaults because
	you will need to reload all settings that you changed manually.
	Note • Loading factory defaults causes the printer to
	auto-calibrate.
LOAD LAST SAVE	Loads values from the last permanent save.
DEFAULT NET	Restores the wired and wireless network settings back to
	factory defaults.

3.Press NEXT/SAVE to select the displayed choice.

When the configuration and calibration sequence is done, PRINTER READY displays.

6/30/06 105SL User Guide 11342L-001 Rev. A