18Printer Setup
Select a Site for the Printer
Select a Site for the Printer
Consider the following when selecting an appropriate location for your printer.Select a Surface
Select a solid, level surface of sufficient size and strength to accommodate the printer and other equipment (such as a computer), if necessary. The choices include a table, countertop, desk, or cart. For the printer’s weight and dimensions, see General Specifications on page 142.
Provide Proper Operating Conditions
This printer is designed to function in a wide range of environmental and electrical conditions, including a warehouse or factory floor. For more information on the required conditions, see General Specifications on page 142.
Table 4 shows the temperature and relative humidity requirements for the printer when it is operating.
Table 4 • Operating Temperature and Humidity| Mode | Temperature | Relative Humidity |
|
|
|
| Thermal Transfer | 41° to 104°F (5° to 40°C) | 20 to 85% |
|
|
|
| Direct Thermal | 32° to 104°F (0° to 40°C) | 20 to 85% |
|
|
|
Allow Proper Space
The printer should have enough space around it for you to be able to open the media door. To allow for proper ventilation and cooling, leave open space on all sides of the printer.
Caution • Do not place any padding or cushioning material behind or under the printer because this restricts air flow and could cause the printer to overheat.
Provide a Data Source
If the printer will be located away from the data source, the selected site must provide the appropriate connections to that data source. For more information on the types of communication interfaces and their limitations, see Select a Communication Interface on page 19.
Provide a Power Source
Place the printer within a short distance of a power outlet that is easily accessible.
105SL User Guide | 6/30/06 |