Operations 43

Load Media in Peel-Off Mode

10.Wind the media liner around the rewind or peel spindle as instructed.

If the printer has

Then…

the…

 

 

 

Rewind option

Note • You may opt to install a core on the rewind spindle

 

for the used media liner. However, a core is not required

 

and typically is not used for peel-off mode.

a.Remove the hook from the rewind spindle.

b.Wind the media liner counterclockwise around the rewind spindle.

c.Reinstall the hook. Insert the short end of the hook into the hole in the center of the adjusting nut (1). Insert the long end of the hook into the small hole on the guide plate (2).

2

1

d.Rotate the spindle counterclockwise several turns to wind the media liner over the hook and remove any slack.

6/30/06

105SL User Guide

11342L-001 Rev. A