Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Remove Media Liner from the Rewind or Peel Spindle, not, Yes, To remove media liner from the rewind or peel spindle, complete these steps:

Operations 47

Load Media in Peel-Off Mode

Remove Media Liner from the Rewind or Peel Spindle

Rewind mode and Peel-Off mode each use spindles to wind used media liner. Remove the media liner from the spindle each time that you change labels.

Important • It is not necessary to turn off the power to remove media liner from the spindles. If power is turned off, all label formats and images, as well as any temporarily saved parameter settings stored in the printer’s internal memory, are lost. When power is turned back on, these items must be reloaded.

To remove media liner from the rewind or peel spindle, complete these steps:

1.Has the media run out?

If... Then...

No	a. Create slack in the media liner by rotating the spindle slightly
	clockwise.
	Rewind	Peel

b.Cut or tear the media liner at the spindle.

RewindPeel

Yes Continue with the next step.

6/30/06 105SL User Guide 11342L-001 Rev. A